2Pieces Front Lower Control Arms Suspension Kit For BMW 525i 528i 530i
2Pieces Front Lower Control Arms Suspension Kit For BMW 525i 528i 530i
2Pieces Front Lower Control Arms Suspension Kit For BMW 525i 528i 530i
2Pieces Front Lower Control Arms Suspension Kit For BMW 525i 528i 530i
2Pieces Front Lower Control Arms Suspension Kit For BMW 525i 528i 530i
2Pieces Front Lower Control Arms Suspension Kit For BMW 525i 528i 530i
2Pieces Front Lower Control Arms Suspension Kit For BMW 525i 528i 530i


$41.6 Buy It Now or Best Offer
free,30-Day Returns





Seller Store
() %,

Location: Ontario, California, United States
Ships to: US,
Item: 256311275293

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Placement on Vehicle:Front, Left, Right, Lower
Type:Control Arm & Ball Joint Assembly
Universal Fitment:No
Control Arm Construction:Forged
Items Included:Mounting Hardware
Custom Bundle:Yes
Interchange Part Number:K80529 K80530
OE/OEM Part Number:Suspension Control Arms and Ball Joints Assembly
Superseded Part Number:Front Driver and Passenger Side Replacement
Manufacturer Warranty:10 Year
VAP-autoparts:VAP-autoparts
UPC:Does not apply
Manufacturer Part Number:V82714401AP
Adjustable:Yes
Modified Item:Yes
Kit Parts Included:Control Arm, Ball Joint
Kit or Single Part:Kit
Greasable or Sealed:Greasable
OE Spec or Performance/Custom:OE Spec
Surface Finish:Polished, Rust Protected
Suspension Grade:Standard
Quantity:2 Pcs
Features:Greasable
Finish:Coated
Cotter Pin Hole:Yes
Material:Alloy Steel
Mounting Style:Bolt-On

eBay Introduction: Our store provide varieties of High Quality Suspension Products, if this item can not meet your needs, you can entry our store to find the products you need. our products have One Year Warranty to ensure the quality. Before you place the order, please check the compatibility and the view Notes or contact us, make sure it fits your vehicle. we hope you enjoy your shopping. Fit For: BMW 525i 2001 – 2003 All Models BMW 528i 1997 – 2000 All Models BMW 530i 2001 – 2003 All Models 2Pieces Front Lower Control Arms Suspension Kit For BMW 525i 528i 530i Introduction: Our store provide varieties of High Quality Suspension Products, if this item can not meet your needs, you can entry our store to find the products you need. our products have One Year Warranty to ensure the quality. Before you place the order, please check the compatibility and the view Notes or contact us, make sure it fits your vehicle. we hope you enjoy your shopping. Fit For: BMW 525i 2001 – 2003 All Models BMW 528i 1997 – 2000 All Models BMW 530i 2001 – 2003 All Models Kit Part Includes 1x Front Lower Rearward Control Arm (Driver) – K80529 1x Front Lower Rearward Control Arm (Passenger) – K80530 Features: Direct replacement for a trouble-free installation. Steel,iron or aluminum construction ensures durability. Powder-coated or painted for long-lasting rust and corrosion resistance. Suspension Control Arm Control arms are installed in pairs on the front and rear axle and connect the chassis to the wheels as part of the suspension. Therefore, they have a significant influence on the driving characteristics of the vehicle. A dynamic or a comfortable driving style? The control arms are individually adjusted to the vehicle depending on the desired characteristics. They also absorb lateral movements and forces resulting from driving off and braking. Control Arm Bushing Replacement Reference: Control arms themselves do not generally wear out, but the control arm bushings and ball joints do, so you will likely need to remove them to service those components. Yet, some OEMs or parts suppliers do not sell bushings and ball joints separately, so you may have to purchase the entire control arm and replace it as a unit. Also, control arms can become bent or damaged as the result of a collision or driving through a deep pothole, so control arms do need to be inspected for damage. Many control arms are now made from forged or sintered aluminum, so you may need to measure for damage or check it on an alignment machine. Picture(A) 1.Remove the coil spring and steering knuckle by following the steps in previous skill drills. 2.Loosen the bolts holding the upper control arm in place. Note that there might be shim packs held in by the bolts. If so, tape them together in their packs, and label their positions. Picture(B) 3.Remove the lower control arm by removing the bolts holding it in place. As you dismantle the system components, carry out a constant inspection of the parts being removed. Doing so will aid you when you need to order replacement parts. You should also mark mating parts with white paint to aid in reassembly. Picture(C) 4.Inspect the upper and lower control arm for wear or damage. If the control arm bushings show signs of excessive wear or deterioration of the bushing material, they will have to be replaced. 5.Replace the worn bushings in the upper and/or lower control arm. Replacement of control arm bushings can be performed two ways — with a hydraulic press with correctly sized press tools or with an air chisel. Be careful using an air chisel: Damage to the control arm can result, such as gouging the mounting surface of the bushing if you slip with the chisel. Picture(D) 6.Press method: Place the control arm in a hydraulic press supported so the bushing is level to the press head. Using the correct-sized adapter, press the bushing out. Picture(E) 7.Using the press, install the new bushing into the control arm. Be careful to start the bushing in straight, or you could bend the control arm. Press it in until the flange bottoms out. Picture(F) 8.Air chisel method: Install the control arm in a vise. Use an air chisel to work the bushing out. Be careful not to gouge the mating surface of the control arm. Picture(G) 9.Using the air hammer, drive the new bushing into place, making sure it is fully seated. Frequently Asked Questions (1).What is a control arm and how does it work? A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body. (2).When to consider replacing a control arm? The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice: Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced. Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm. Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road. Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers. (3).Do I need to replace the control arm if the bushings are worn? What is the safety risk? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (4).Is it safe to drive with a control arm problem? No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired. (5).Attentions The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension. Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint. All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : K80529 K80530 OE/OEM Part Number : Suspension Control Arms and Ball Joints Assembly Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : VAP-autoparts Manufacturer Part Number : V82714401AP Adjustable : Yes Modified Item : Yes Kit Parts Included : Control Arm, Ball Joint Kit or Single Part : Kit Greasable or Sealed : Greasable OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Suspension Grade : Standard Quantity : 2 Pcs Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to all the auto parts purchased from VAP-AUTOPARTS. (2).VAP-AUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests. (5).VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests. (6).VAP-AUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).VAP-AUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. Return (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Best Sales For Ford Ranger 2.3L 2.5L F150 Expedition Lincoln Mercury FD487 Ignition Coil USD 27.99 For Chevrolet Silverado GMC Sierra 1500 4.8L 5.3L 2006-2000 Square Ignition Coil USD 64.99 4PCS Ignition Coil For Toyota Camry RAV4 Highlander Solara Scion 2.4L UF333 USD 38.99 6x Ignition Coils for Nissan Frontier Pathfinder Altima Maxima 3.5L 4.0L UF349 USD 48.99 4x Ignition Coil For 00-08 Toyota Corolla Celica Matrix 1.8L UF247 90919-02339 USD 36.99 Newly Listed VAP-Auto Roof Rack For 15-23 HYUNDAI SANTAFE Cross Bar Cargo Carrier Aluminum USD 86.75 Fits 2007-2014 JEEP PATRIOT Left Side Mirror Black Manual Fold Power Mirror USD 45.99 VAP-Auto Roof Rack For 2019-2023 KIA Telluride Cross Bar Cargo Carrier Aluminum USD 89.75 VAP-Auto Roof Rack For 21-23 Ford Bronco Sport Cross Bar Cargo Carrier Aluminum USD 89.75 VAP-Auto Roof Rack For 2010-2023 JEEP GLADIATOR Cross Bar Cargo Carrier Aluminum USD 117.75 Terms & Contact Shipping Policy Payment Policy Return Policy FAQ About Us 2Pieces Front Lower Control Arms Suspension Kit For BMW 525i 528i 530i Introduction: Our store provide varieties of High Quality Suspension Products, if this item can not meet your needs, you can entry our store to find the products you need. our products have One Year Warranty to ensure the quality. Before you place the order, please check the compatibility and the view Notes or contact us, make sure it fits your vehicle. we hope you enjoy your shopping. Fit For: BMW 525i 2001 – 2003 All Models BMW 528i 1997 – 2000 All Models BMW 530i 2001 – 2003 All Models Kit Part Includes 1x Front Lower Rearward Control Arm (Driver) – K80529 1x Front Lower Rearward Control Arm (Passenger) – K80530 Features: Direct replacement for a trouble-free installation. Steel,iron or aluminum construction ensures durability. Powder-coated or painted for long-lasting rust and corrosion resistance. Suspension Control Arm Control arms are installed in pairs on the front and rear axle and connect the chassis to the wheels as part of the suspension. Therefore, they have a significant influence on the driving characteristics of the vehicle. A dynamic or a comfortable driving style? The control arms are individually adjusted to the vehicle depending on the desired characteristics. They also absorb lateral movements and forces resulting from driving off and braking. Control Arm Bushing Replacement Reference: Control arms themselves do not generally wear out, but the control arm bushings and ball joints do, so you will likely need to remove them to service those components. Yet, some OEMs or parts suppliers do not sell bushings and ball joints separately, so you may have to purchase the entire control arm and replace it as a unit. Also, control arms can become bent or damaged as the result of a collision or driving through a deep pothole, so control arms do need to be inspected for damage. Many control arms are now made from forged or sintered aluminum, so you may need to measure for damage or check it on an alignment machine. Picture(A) 1.Remove the coil spring and steering knuckle by following the steps in previous skill drills. 2.Loosen the bolts holding the upper control arm in place. Note that there might be shim packs held in by the bolts. If so, tape them together in their packs, and label their positions. Picture(B) 3.Remove the lower control arm by removing the bolts holding it in place. As you dismantle the system components, carry out a constant inspection of the parts being removed. Doing so will aid you when you need to order replacement parts. You should also mark mating parts with white paint to aid in reassembly. Picture(C) 4.Inspect the upper and lower control arm for wear or damage. If the control arm bushings show signs of excessive wear or deterioration of the bushing material, they will have to be replaced. 5.Replace the worn bushings in the upper and/or lower control arm. Replacement of control arm bushings can be performed two ways — with a hydraulic press with correctly sized press tools or with an air chisel. Be careful using an air chisel: Damage to the control arm can result, such as gouging the mounting surface of the bushing if you slip with the chisel. Picture(D) 6.Press method: Place the control arm in a hydraulic press supported so the bushing is level to the press head. Using the correct-sized adapter, press the bushing out. Picture(E) 7.Using the press, install the new bushing into the control arm. Be careful to start the bushing in straight, or you could bend the control arm. Press it in until the flange bottoms out. Picture(F) 8.Air chisel method: Install the control arm in a vise. Use an air chisel to work the bushing out. Be careful not to gouge the mating surface of the control arm. Picture(G) 9.Using the air hammer, drive the new bushing into place, making sure it is fully seated. Frequently Asked Questions (1).What is a control arm and how does it work? A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body. (2).When to consider replacing a control arm? The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice: Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced. Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm. Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road. Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers. (3).Do I need to replace the control arm if the bushings are worn? What is the safety risk? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (4).Is it safe to drive with a control arm problem? No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired. (5).Attentions The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension. Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint. All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : K80529 K80530 OE/OEM Part Number : Suspension Control Arms and Ball Joints Assembly Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : VAP-autoparts Manufacturer Part Number : V82714401AP Adjustable : Yes Modified Item : Yes Kit Parts Included : Control Arm, Ball Joint Kit or Single Part : Kit Greasable or Sealed : Greasable OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Suspension Grade : Standard Quantity : 2 Pcs Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On ShippingWarrantyReturnDiscountSales Tax WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to all the auto parts purchased from VAP-AUTOPARTS. (2).VAP-AUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests. (5).VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests. (6).VAP-AUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).VAP-AUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Copyright of vap-autoparts. All rights reserved.

Frequently Asked Questions About 2Pieces Front Lower Control Arms Suspension Kit For BMW 525i 528i 530i in My Website

www.deafgirlsrescue.org is the best online shopping platform where you can buy 2Pieces Front Lower Control Arms Suspension Kit For BMW 525i 528i 530i from renowned brand(s). www.deafgirlsrescue.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 2Pieces Front Lower Control Arms Suspension Kit For BMW 525i 528i 530i on www.deafgirlsrescue.org?

www.deafgirlsrescue.org helps you to shop online and delivers Patek Philippe to your doorstep. The best-selling Patek Philippe on www.deafgirlsrescue.org are: PATEK PHILIPPE genuine Archives Certificate Guarantee Of Origin Calatrava 3420 Patek Philippe Cal 10 110 part 401 stem NOS Vintage Magazine Lot: Patek Philippe & Colors Collection, Rare Finds #3300 patek philippe 4831 Complete authentic set Patek Philippe Complications 5054J With Archives 18K Yellow Automatic Watch 36mm Patek Philippe Complications World Time Auto White Gold Mens Watch 5231G-001 PATEK PHILIPPE Grand Complication 3970EJ-053 watch men TO157659 NEW Patek Philippe International Vol 5 #3 Ref. 5940 Nicholas Foulkes Auctions PATEK PHILIPPE Gondolo 4224/3 Ladies #GZ118 Rare Patek Philippe Naviquartz Desk Clock in Working Condition Authentic Patek Philippe Calatrava Travel Time 5134j Booklet Manual Cover SET Ermenegildo Zegna Patek Philippe Collaboration Mens Luxury Silk Tie 2002 Patek Philippe Aquanaut NOS Green Strap C92 Men Size PATEK PHILIPPE Leather Travel Watch Case Pouch Dark Brown New and unused ORIG Patek Philippe Calibres 12-600, 10-200 CENTER WHEEL WATCH PART CENTRE Watch Sapphire Crystal Glass for Patek Philippe Nautilus 4700/4970 18.5*18.5mm Patek Phillipe 21x18MM Uncut Green Rubber Strap: 5167a, 5167r, 5164a, 5164r 18k White Gold Patek Philippe With Diamond Bezel Watch Reference 3491 Patek Philippe International Vol 4 #2 Bernard Buffet Ref. 2526 Letter T. Stern Vintage 34mm LeCoultre Power Reserve Men’s Bumper Automatic Wristwatch 481 Patek Philippe M39743: 18k Rose Gold Nautilus, Watch Ref. 5712R, Box and Papers Patek Philippe Gondolo Tonneau Automatic 5030J 18K Gold Mens Watch 34x41mm B&P Original Patek Philippe Nautilus 5711g 18k Gold 40mm Case, Crystal and End Links Patek Philippe Nautilus Steel Automatic 40mm Bracelet Watch 5711/1A-001 Patek Philippe Annual Calendar Regulator 5235G White Gold Silver Dial – FULL SET Patek Philippe 5738R-001 Golden Ellipse Black Dial Watch Authentic Patek Philippe 20mm x 16mm Shiny Black Alligator Watch Strap B B38 OEM Patek Philippe Gondolo 5024G watch men TO149907 discount PATEK PHILIPPE Calatrava Ref.3426 Cal.23-300 Men’s I#131416 Vintage PATEK Philippe 18kt Buckle And Band 16mm. PATEK PHILIPPE 315SC Part 771 Mainspring To Fit NOS Patek Philippe World Time 18KRG 5230R-012 watch men TO170273 Patek Philippe Silk Men’s Tie BNIB Fast Ship! VIP GIFT Navy Blue Authentic 2023 Patek Philippe Cal 23-300 Watch Movement Spares Vintage Patek Philippe Box 3970 3940 Cherry Wood Leather Patek Philippe watch box case travel carry case dark brown leather Patek Philippe Patekphilppe genuine leather belt dark brown watch #KN929 PATEK PHILIPPE Tiffany ED KOEHN pocket watch movement 39mm Patek Philippe calibre 320 Barrel Complete with mainspring. genuine new Swiss Ma PATEK PHILIPPE 28-255 PART 1485/1 REVERSER MOUNTED NEW ORIGINAL PP Patek Philippe Neptune Moonphase Power Reserve Steel Mens Watch 5085 Papers Look 18 MM Pin Buckle Clasp Watch Leather Rubber Strap Fits for Patek Philippe Gold PATEK PHILIPPE Luxury Watch SOFTCOVER CATALOG 2020 2021 – 108 Pages Patek Philippe: Complicated Wrist Watches (German, English and French Edition) patek philippe Calatrava 3923A watch men TO01197 …PATEK PHILIPPE INTERNATIONAL MAGAZINE Number 11 (2002) Patek Philippe Watch Book RARE Patek Philippe Calatrava 5196R-001 watch men TO153403 Patek Philippe Collection 2002/2003 E Geneva Watch Catalog/Book Patek Philippe Calatrava 4897G-010 White Gold Diamond Hand Wound Ladies Watch Skeleton Patek Philippe Geneve Watch Mens Gold Swiss Vintage 1890s Engraved Patek Philippe Caran D’Ache Watch Ballpoint Pen With Box Brand New 2020 Tiffany & Co. Stamped Patek Philippe Box Papers White Gold 5712G-001 Patek Philippe Calatrava 3923J Men’s #W1147 Patek Philippe Calatrava Wristwatch 5120/1G-001 Gold Patek Philippe Geneve Book by Martin Huber & Alan Banbery 1982 First Edition PATEK PHILIPPE 2018 Collection Catalog w/Retail Price List Pamphlet Patek Philippe K18YG Cufflinks Luxury Men’s Ref.9002 With Guarantee card Antique Patek Philippe Dress Open Face Pocket Watch Wright Kay Detroit SN 84910 1950s Vintage Patek Philippe Oversized Gold Calatrava Mens Watch Ref 570 / 570j Patek Philippe International Magazine Lot Of 10 Volume 2 Patek Philippe 175th Anniversary Commemorative Watches Catalog *FACTORY SEALED* Patek Philippe Calatrava 33 18K Yellow Gold Champagne Gold Bracelet Watch | BOX Patek Philippe Journal Notebook Paper Notepad AD VIP Gift 14 MM Spring Bar Pin Buckle Watch Leather Rubber Strap Fits For Patek Philippe Patek Philippe 3634 Jumbo Golden Ellipse ONYX Dial 1973 Watch Serviced Box Paper Patek Philippe Lady Wrist Watch Movement 854887, Not working For Parts, See Note Patek Philippe 5167A Black Rubber Strap C09 21x18mm OEM 5167 Authentic Patek Philippe Geneve Black Leather Watch Strap 17. 9 x 16mm, 11.5+7.5 Patek Philippe Gondolo Pocket Watch Face 22 Lines 2009 Mint Patek Philippe 7119G-001 31mm 18K White Gold Gray Dial Unisex Watch Patek Philippe Calatrava 5117J-001 automatic date mens wristwatch 18K solid gold Patek Philippe Calatrava 36mm 18K Rose Gold Hand-Wind Mens Watch 5119R-001 Patek Philippe Aquanaut 5167r-001 40mm Rose Gold Brown Dial Full Set PATEK PHILIPPE CALATRAVA TRAVEL TIME 18CT GOLD REF. 5134J-001 Patek Philippe Complication 18K Yellow Gold Watch 5054J Authentic Patek Philippe 21mm x 16mm Blue Alligator Watch Strap Band D C95 OEM Patek Philippe 3800 1 White “SWISS” Dial Genuine “CERAMIC” Extreme Rare Patek Philippe Authentic 18k White Gold Crown-4.54MM item# 92043 Patek Philippe Ellipse 3988J 18k Yellow Gold Swiss Quartz White Dial Men 27mm Patek Philippe Handcraft Keyring Keychain Leather Azure Blue, Ref. P1345 Rare PATEK PHILIPPE Travel Watch Box Carry Box Case Dark Brown Leather BRAND NEW Patek Philippe Porcelain Plate 2012 Collection 1909 Pocket Watch Design NM Patek Philippe Annual Calendar Complications 5396G-011 White Gold Watch Red Square Patek Philippe Suede Nautilus Aquanaut Travel Case Patek Philippe La Flamme Ladies Watch 18k Authentic PATEK PHILIPPE Hand Bag / Tote Bag VIP Gift Vintage Tiffany & Co Wrist Watch Movement Made By PP Circa 1885 Patek Philippe Calatrava Cufflinks Brand new, never used Patek Philippe Lady Ellipse 18K Yellow Gold Ref. 4226 Patek Philippe Calatrava Rose Gold White Dial Automatic Men’s Watch 3802R Patek Philippe 2016 Collection Book Volume 3 – Hardcover – With Poster Time Warrior Men’s Japan Quartz Watch Luminous, Luxury Stainless Steel AP Style Patek Philippe Calatrava White Men’s Watch 6119R-001 TK Antique 1900s Patek Philippe 18k Yellow Gold SZ6 Ladies POCKETWATCH SZ 6 *ORIGINAL PATEK PHILIPPE MATT BLACK LEATHER BAND NEW 22mm Black/White Genuine Leather Classic Watch Band Strap Rose Gold Tone Buckle Patek Philippe Travel Time 34mm White Gold White Dial Hand Wind Men Watch 5034G PATEK PHILIPPE Cal. 310sc 2576 Date Jumper NOS Patek Phillipe Service Long Box #1, mint Mens Pullover Fleece Hoodie

Leave a Reply