$85.45 Buy It Now or Best Offer
free,30-Day Returns
Seller Store
() %,
Location: Ontario, California, United States
Ships to: US,
Item: 174369436117
Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Placement on Vehicle:Front, Left, Right, Lower
Type:Control Arm & Ball Joint Assembly
Universal Fitment:No
Control Arm Construction:Forged
Items Included:Mounting Hardware
Custom Bundle:Yes
Interchange Part Number:K620487, K620486
OE/OEM Part Number:Suspension Control Arms and Ball Joints Assembly
Superseded Part Number:Front Driver and Passenger Side Replacement
Manufacturer Warranty:10 Year
CARMASUSPENSIONS:CARMASUSPENSIONS
UPC:Does not apply
Manufacturer Part Number:CA81109301NS
Adjustable:Yes
Modified Item:Yes
Kit Parts Included:Control Arm, Ball Joint
Kit or Single Part:Kit
Greasable or Sealed:Greasable
OE Spec or Performance/Custom:OE Spec
Surface Finish:Polished, Rust Protected
Suspension Grade:Standard
Quantity:2 Pcs
Features:Greasable
Finish:Coated
Cotter Pin Hole:Yes
Material:Alloy Steel
Mounting Style:Bolt-On
eBay 1.Fit For: 2007-2014 FORD EDGE All Models 2007-2014 LINCOLN MKX All Models 2007-2013 MAZDA CX-9 All Models 2.Package Includes: 1x Front Driver Side Lower Control Arm w/Ball Joint – K620487 1x Front Passenger Side Lower Control Arm w/Ball Joint – K620486 3.Note Although some parts have grease fittings, other parts are factory sealed, but do not affect the fit and quality of the parts. Please check above compatibility list to make sure it fits your vehicle. For 2007-2012 2013 2014 Mazda CX-9 2x Front Lower Control Arms + Ball Joint 1.Fit For: 2007-2014 FORD EDGE All Models 2007-2014 LINCOLN MKX All Models 2007-2013 MAZDA CX-9 All Models 2.Package Includes: 1x Front Driver Side Lower Control Arm w/Ball Joint – K620487 1x Front Passenger Side Lower Control Arm w/Ball Joint – K620486 3.Note Although some parts have grease fittings, other parts are factory sealed, but do not affect the fit and quality of the parts. Please check above compatibility list to make sure it fits your vehicle. If you want to find more about suspension kits,clicking our store. Suspension Control Arm Control arms are installed in pairs on the front and rear axle and connect the chassis to the wheels as part of the suspension. Therefore, they have a significant influence on the driving characteristics of the vehicle. A dynamic or a comfortable driving style? The control arms are individually adjusted to the vehicle depending on the desired characteristics. They also absorb lateral movements and forces resulting from driving off and braking. Suspension Control Arm Replacement Guideline: Control arms are installed in pairs on the front and rear axle and connect the chassis to the wheels as part of the suspension. Therefore, they have a significant influence on the driving characteristics of the vehicle. A dynamic or a comfortable driving style? The control arms are individually adjusted to the vehicle depending on the desired characteristics. They also absorb lateral movements and forces resulting from driving off and braking. Picture(A) A defective control arm can manifest in the following ways: (1).Noise (squeaking, creaking, rumbling). (2).Deteriorating driveability. (3).Increasingly woolly and imprecise steering. (4).Uneven tyre wear. Tip:If the control arm is in working order, it is possible to only replace the defective bearings and joints. However, replacing bearings, control arm bushings and ball joints can be very complex and costly. Picture(B) 1.First lift the vehicle using a car lift, ideally a wheel-free four-post car lift. This makes it easier to correctly tighten the control arm fixing screws. WARNING:Depending on the axle design, the control arm may need to be secured against falling with a suitable device, e.g. a transmission lifter. 2.Treat the fixing screws and nuts of the control arm with rust solvent and leave it to work for a few minutes so that they are easier to loosen. 3.On vehicles with automatic headlight levelling, it may be necessary to detach the leveling sensor from the control arm. Picture(C) 4.If the stabilizer is connected to the control arm, the next step is to loosen and remove the corresponding stabiliser fixing screws. 5.Loosen and remove the control arm fixing screws. 6.Loosen the ball joint at the steering knuckle with a suitable special tool (e.g. a puller). 7.Remove the old control arm. Picture(D) 8.Clean the mounting flange of the ball joint pin on the steering knuckle with sandpaper and then with brake cleaner. Otherwise single rust particles can enter the new control arm joint via the ball pin, potentially leading to premature failure of the joint. Picture(E) 9.Fit the new control arm with the supplied accessories and attach new fixing screws and nuts. Picture(F) 10.Reattach the stabilizer and, if applicable, the leveling sensor for headlight leveling to the control arm. NOTE:Do not tighten the fixing screws and nuts in this step, otherwise the rubber mounts will twist when the suspension compresses. This would lead to undesired preloading onf the mounts. Picture(G) 11.Now lower the vehicle until the suspension is compressed. Depending on vehicle type, load or unload the vehicle until the required height published in the specific installation instruction is reached. This is where a wheel-free four-post car lift is advantageous, as the underside of the vehicle can still be easily accessed once lowered. 12.Tighten the fixing screws with the torque stipulated by the vehicle manufacturer. 13.Lower the vehicle all the way. 14.Measure the chassis and adjust if necessary. 15.Check and, if necessary, adjust the headlight settings on vehicles with automatic headlight leveling where the leveling sensor is attached to the control arm. 16.To conclude, test-drive the vehicle. Frequently Asked Questions (1).What’s the function of control arm? The control arm connects the hub and the frame of the car. There are ball joints on the hub side and bushings on the frame side to achieve up and down instead of forward and rearward. (2).What is the significance of the control arm for the car? As an important part of the car suspension, the control arm is used to transmit the required supporting force of the wheel and to withstand all the front and rear direction stresses. It is an important safety part of the chassis system. Therefore, it requires high strength and reliability in the design. Its fatigue strength is directly related to the safety of vehicles and members. (3).How to tell the quality of control arm? Look at the materials and processing of the control arm: the materials used to control the arm, common are steel and aluminum alloy. In ordinary family cars, steel control arms are very common, and the basic appeal is to meet the strength while controlling costs. In the middle and high-end models, you will see the control arm of the aluminum alloy and the wheel bearing housing. In addition to meeting the strength of the suspension, this material can further reduce the weight and reduce the weight of the suspension spring to improve the suspension response. Improve driving performance. Look at chassis protection and workmanship: Regarding chassis protection, we mainly pay attention to whether it is equipped with engine under guard, whether there is coating or cover at the bottom of the car body, whether the oil pipe is covered with a guard plate, whether the front and rear wheel arches are protected. Board or coating coverage, etc. (4).Do I need to replace the control arm if the bushings are worn? What is the safety risk? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (5).What is the average cost of replacing control arms? The cost to replace control arms depend on the vehicle. Control arms cost different amounts depending on the vehicle, as well as the labor to install. Some are easy to install and take little time, while others can take several hours. Item Specifics Placement on Vehicle Front Type Control Arm & Ball Joint Assembly Universal Fitment No Control Arm Construction Forged Items Included Mounting Hardware Custom Bundle Yes Interchange Part Number K620487, K620486 OE/OEM Part Number Suspension Control Arms and Ball Joints Assembly Superseded Part Number Front Driver and Passenger Side Replacement Manufacturer Warranty 10 Year Brand CARMASUSPENSIONS Manufacturer Part Number CA81109301NS Adjustable Yes Modified Item Yes Kit Parts Included Control Arm, Ball Joint Kit or Single Part Kit Greasable or Sealed Greasable OE Spec or Performance/Custom OE Spec Surface Finish Polished, Rust Protected Suspension Grade Standard Quantity 2 Pcs Features Greasable Finish Coated Cotter Pin Hole Yes Material Alloy Steel Mounting Style Bolt-On Discount Targeted Disounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from CARMASUSPENSIONS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means CARMASUSPENSIONS won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).CARMASUSPENSIONS has the final power of interpretation of all the above Targeted Discount Terms and Procedures. Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from CARMASUSPENSIONS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).CARMASUSPENSIONS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).CARMASUSPENSIONS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise CARMASUSPENSIONS has the right to refuse any replacement requests. (5).CARMASUSPENSIONS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise CARMASUSPENSIONS has the right to refuse any replacement requests. (6).CARMASUSPENSIONS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).CARMASUSPENSIONS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. Return (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Best Sales Fits Ford F-250 F-350 Super Duty – 4WD 4×4 New 5x Complete Front Suspension Kit USD 108.99 For 1999-06 Chevy + GMC 1500 Trucks 6-Lug 4×4 Complete Front Suspension Kit x13 USD 116.92 For Chevy GMC C1500 C2500 Suburban Tahoe 15Pcs Front Control Arms Sway Bars Kit USD 261.99 For Ford Ranger & Explorer 4WD 10Pcs Front Control Arms Ball Joints Tie Rods Kit USD 83.59 For Chevrolet Malibu Pontiac G6 Saturn Aura 8 x Control Arm Sway Bar Tie Rod Kit USD 116.59 Newly Listed Fits 03-04 Ford Expedition Lincoln Navigator Front Upper Control Arm Ball Joint USD 181.35 Front Inner Outer Tie Rod Control Arm Steering For Pontiac and Chevrolet 6x USD 92.50 Fits 2005-2010 Dodge Dakota 4x Upper Control Arm And Ball Joint Tie Rod End USD 80.84 Air Suspension Bag W01-358-8709 For Hendrickson Goodyear 1R13-159 USD 85.25 4 Front Upper Lower Ball Joints Suspension Kit For Toyota Tundra 4Runner 00-02 USD 56.99 For 2007-2012 2013 2014 Mazda CX-9 2x Front Lower Control Arms + Ball Joint 1.Fit For: 2007-2014 FORD EDGE All Models 2007-2014 LINCOLN MKX All Models 2007-2013 MAZDA CX-9 All Models 2.Package Includes: 1x Front Driver Side Lower Control Arm w/Ball Joint – K620487 1x Front Passenger Side Lower Control Arm w/Ball Joint – K620486 3.Note Although some parts have grease fittings, other parts are factory sealed, but do not affect the fit and quality of the parts. Please check above compatibility list to make sure it fits your vehicle. If you want to find more about suspension kits,clicking our store. Suspension Control Arm Control arms are installed in pairs on the front and rear axle and connect the chassis to the wheels as part of the suspension. Therefore, they have a significant influence on the driving characteristics of the vehicle. A dynamic or a comfortable driving style? The control arms are individually adjusted to the vehicle depending on the desired characteristics. They also absorb lateral movements and forces resulting from driving off and braking. Suspension Control Arm Replacement Guideline: Control arms are installed in pairs on the front and rear axle and connect the chassis to the wheels as part of the suspension. Therefore, they have a significant influence on the driving characteristics of the vehicle. A dynamic or a comfortable driving style? The control arms are individually adjusted to the vehicle depending on the desired characteristics. They also absorb lateral movements and forces resulting from driving off and braking. Picture(A) A defective control arm can manifest in the following ways: (1).Noise (squeaking, creaking, rumbling). (2).Deteriorating driveability. (3).Increasingly woolly and imprecise steering. (4).Uneven tyre wear. Tip:If the control arm is in working order, it is possible to only replace the defective bearings and joints. However, replacing bearings, control arm bushings and ball joints can be very complex and costly. Picture(B) 1.First lift the vehicle using a car lift, ideally a wheel-free four-post car lift. This makes it easier to correctly tighten the control arm fixing screws. WARNING:Depending on the axle design, the control arm may need to be secured against falling with a suitable device, e.g. a transmission lifter. 2.Treat the fixing screws and nuts of the control arm with rust solvent and leave it to work for a few minutes so that they are easier to loosen. 3.On vehicles with automatic headlight levelling, it may be necessary to detach the leveling sensor from the control arm. Picture(C) 4.If the stabilizer is connected to the control arm, the next step is to loosen and remove the corresponding stabiliser fixing screws. 5.Loosen and remove the control arm fixing screws. 6.Loosen the ball joint at the steering knuckle with a suitable special tool (e.g. a puller). 7.Remove the old control arm. Picture(D) 8.Clean the mounting flange of the ball joint pin on the steering knuckle with sandpaper and then with brake cleaner. Otherwise single rust particles can enter the new control arm joint via the ball pin, potentially leading to premature failure of the joint. Picture(E) 9.Fit the new control arm with the supplied accessories and attach new fixing screws and nuts. Picture(F) 10.Reattach the stabilizer and, if applicable, the leveling sensor for headlight leveling to the control arm. NOTE:Do not tighten the fixing screws and nuts in this step, otherwise the rubber mounts will twist when the suspension compresses. This would lead to undesired preloading onf the mounts. Picture(G) 11.Now lower the vehicle until the suspension is compressed. Depending on vehicle type, load or unload the vehicle until the required height published in the specific installation instruction is reached. This is where a wheel-free four-post car lift is advantageous, as the underside of the vehicle can still be easily accessed once lowered. 12.Tighten the fixing screws with the torque stipulated by the vehicle manufacturer. 13.Lower the vehicle all the way. 14.Measure the chassis and adjust if necessary. 15.Check and, if necessary, adjust the headlight settings on vehicles with automatic headlight leveling where the leveling sensor is attached to the control arm. 16.To conclude, test-drive the vehicle. Frequently Asked Questions (1).What’s the function of control arm? The control arm connects the hub and the frame of the car. There are ball joints on the hub side and bushings on the frame side to achieve up and down instead of forward and rearward. (2).What is the significance of the control arm for the car? As an important part of the car suspension, the control arm is used to transmit the required supporting force of the wheel and to withstand all the front and rear direction stresses. It is an important safety part of the chassis system. Therefore, it requires high strength and reliability in the design. Its fatigue strength is directly related to the safety of vehicles and members. (3).How to tell the quality of control arm? Look at the materials and processing of the control arm: the materials used to control the arm, common are steel and aluminum alloy. In ordinary family cars, steel control arms are very common, and the basic appeal is to meet the strength while controlling costs. In the middle and high-end models, you will see the control arm of the aluminum alloy and the wheel bearing housing. In addition to meeting the strength of the suspension, this material can further reduce the weight and reduce the weight of the suspension spring to improve the suspension response. Improve driving performance. Look at chassis protection and workmanship: Regarding chassis protection, we mainly pay attention to whether it is equipped with engine under guard, whether there is coating or cover at the bottom of the car body, whether the oil pipe is covered with a guard plate, whether the front and rear wheel arches are protected. Board or coating coverage, etc. (4).Do I need to replace the control arm if the bushings are worn? What is the safety risk? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (5).What is the average cost of replacing control arms? The cost to replace control arms depend on the vehicle. Control arms cost different amounts depending on the vehicle, as well as the labor to install. Some are easy to install and take little time, while others can take several hours. DiscountShippingWarrantyReturnFeedback Targeted Disounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from CARMASUSPENSIONS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means CARMASUSPENSIONS won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).CARMASUSPENSIONS has the final power of interpretation of all the above Targeted Discount Terms and Procedures. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from CARMASUSPENSIONS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).CARMASUSPENSIONS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).CARMASUSPENSIONS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise CARMASUSPENSIONS has the right to refuse any replacement requests. (5).CARMASUSPENSIONS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise CARMASUSPENSIONS has the right to refuse any replacement requests. (6).CARMASUSPENSIONS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).CARMASUSPENSIONS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Copyright of carmasuspensions. All rights reserved.
Frequently Asked Questions About For 2007-2012 2013 2014 Mazda CX-9 2x Front Lower Control Arms + Ball Joint in My Website
www.deafgirlsrescue.org is the best online shopping platform where you can buy For 2007-2012 2013 2014 Mazda CX-9 2x Front Lower Control Arms + Ball Joint from renowned brand(s). www.deafgirlsrescue.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling For 2007-2012 2013 2014 Mazda CX-9 2x Front Lower Control Arms + Ball Joint on www.deafgirlsrescue.org?
www.deafgirlsrescue.org helps you to shop online and delivers Patek Philippe to your doorstep. The best-selling Patek Philippe on www.deafgirlsrescue.org are: PATEK PHILIPPE genuine Archives Certificate Guarantee Of Origin Calatrava 3420 Patek Philippe Cal 10 110 part 401 stem NOS Vintage Magazine Lot: Patek Philippe & Colors Collection, Rare Finds #3300 patek philippe 4831 Complete authentic set Patek Philippe Complications 5054J With Archives 18K Yellow Automatic Watch 36mm Patek Philippe Complications World Time Auto White Gold Mens Watch 5231G-001 PATEK PHILIPPE Grand Complication 3970EJ-053 watch men TO157659 NEW Patek Philippe International Vol 5 #3 Ref. 5940 Nicholas Foulkes Auctions PATEK PHILIPPE Gondolo 4224/3 Ladies #GZ118 Rare Patek Philippe Naviquartz Desk Clock in Working Condition Authentic Patek Philippe Calatrava Travel Time 5134j Booklet Manual Cover SET Ermenegildo Zegna Patek Philippe Collaboration Mens Luxury Silk Tie 2002 Patek Philippe Aquanaut NOS Green Strap C92 Men Size PATEK PHILIPPE Leather Travel Watch Case Pouch Dark Brown New and unused ORIG Patek Philippe Calibres 12-600, 10-200 CENTER WHEEL WATCH PART CENTRE Watch Sapphire Crystal Glass for Patek Philippe Nautilus 4700/4970 18.5*18.5mm Patek Phillipe 21x18MM Uncut Green Rubber Strap: 5167a, 5167r, 5164a, 5164r 18k White Gold Patek Philippe With Diamond Bezel Watch Reference 3491 Patek Philippe International Vol 4 #2 Bernard Buffet Ref. 2526 Letter T. Stern Vintage 34mm LeCoultre Power Reserve Men’s Bumper Automatic Wristwatch 481 Patek Philippe M39743: 18k Rose Gold Nautilus, Watch Ref. 5712R, Box and Papers Patek Philippe Gondolo Tonneau Automatic 5030J 18K Gold Mens Watch 34x41mm B&P Original Patek Philippe Nautilus 5711g 18k Gold 40mm Case, Crystal and End Links Patek Philippe Nautilus Steel Automatic 40mm Bracelet Watch 5711/1A-001 Patek Philippe Annual Calendar Regulator 5235G White Gold Silver Dial – FULL SET Patek Philippe 5738R-001 Golden Ellipse Black Dial Watch Authentic Patek Philippe 20mm x 16mm Shiny Black Alligator Watch Strap B B38 OEM Patek Philippe Gondolo 5024G watch men TO149907 discount PATEK PHILIPPE Calatrava Ref.3426 Cal.23-300 Men’s I#131416 Vintage PATEK Philippe 18kt Buckle And Band 16mm. PATEK PHILIPPE 315SC Part 771 Mainspring To Fit NOS Patek Philippe World Time 18KRG 5230R-012 watch men TO170273 Patek Philippe Silk Men’s Tie BNIB Fast Ship! VIP GIFT Navy Blue Authentic 2023 Patek Philippe Cal 23-300 Watch Movement Spares Vintage Patek Philippe Box 3970 3940 Cherry Wood Leather Patek Philippe watch box case travel carry case dark brown leather Patek Philippe Patekphilppe genuine leather belt dark brown watch #KN929 PATEK PHILIPPE Tiffany ED KOEHN pocket watch movement 39mm Patek Philippe calibre 320 Barrel Complete with mainspring. genuine new Swiss Ma PATEK PHILIPPE 28-255 PART 1485/1 REVERSER MOUNTED NEW ORIGINAL PP Patek Philippe Neptune Moonphase Power Reserve Steel Mens Watch 5085 Papers Look 18 MM Pin Buckle Clasp Watch Leather Rubber Strap Fits for Patek Philippe Gold PATEK PHILIPPE Luxury Watch SOFTCOVER CATALOG 2020 2021 – 108 Pages Patek Philippe: Complicated Wrist Watches (German, English and French Edition) patek philippe Calatrava 3923A watch men TO01197 …PATEK PHILIPPE INTERNATIONAL MAGAZINE Number 11 (2002) Patek Philippe Watch Book RARE Patek Philippe Calatrava 5196R-001 watch men TO153403 Patek Philippe Collection 2002/2003 E Geneva Watch Catalog/Book Patek Philippe Calatrava 4897G-010 White Gold Diamond Hand Wound Ladies Watch Skeleton Patek Philippe Geneve Watch Mens Gold Swiss Vintage 1890s Engraved Patek Philippe Caran D’Ache Watch Ballpoint Pen With Box Brand New 2020 Tiffany & Co. Stamped Patek Philippe Box Papers White Gold 5712G-001 Patek Philippe Calatrava 3923J Men’s #W1147 Patek Philippe Calatrava Wristwatch 5120/1G-001 Gold Patek Philippe Geneve Book by Martin Huber & Alan Banbery 1982 First Edition PATEK PHILIPPE 2018 Collection Catalog w/Retail Price List Pamphlet Patek Philippe K18YG Cufflinks Luxury Men’s Ref.9002 With Guarantee card Antique Patek Philippe Dress Open Face Pocket Watch Wright Kay Detroit SN 84910 1950s Vintage Patek Philippe Oversized Gold Calatrava Mens Watch Ref 570 / 570j Patek Philippe International Magazine Lot Of 10 Volume 2 Patek Philippe 175th Anniversary Commemorative Watches Catalog *FACTORY SEALED* Patek Philippe Calatrava 33 18K Yellow Gold Champagne Gold Bracelet Watch | BOX Patek Philippe Journal Notebook Paper Notepad AD VIP Gift 14 MM Spring Bar Pin Buckle Watch Leather Rubber Strap Fits For Patek Philippe Patek Philippe 3634 Jumbo Golden Ellipse ONYX Dial 1973 Watch Serviced Box Paper Patek Philippe Lady Wrist Watch Movement 854887, Not working For Parts, See Note Patek Philippe 5167A Black Rubber Strap C09 21x18mm OEM 5167 Authentic Patek Philippe Geneve Black Leather Watch Strap 17. 9 x 16mm, 11.5+7.5 Patek Philippe Gondolo Pocket Watch Face 22 Lines 2009 Mint Patek Philippe 7119G-001 31mm 18K White Gold Gray Dial Unisex Watch Patek Philippe Calatrava 5117J-001 automatic date mens wristwatch 18K solid gold Patek Philippe Calatrava 36mm 18K Rose Gold Hand-Wind Mens Watch 5119R-001 Patek Philippe Aquanaut 5167r-001 40mm Rose Gold Brown Dial Full Set PATEK PHILIPPE CALATRAVA TRAVEL TIME 18CT GOLD REF. 5134J-001 Patek Philippe Complication 18K Yellow Gold Watch 5054J Authentic Patek Philippe 21mm x 16mm Blue Alligator Watch Strap Band D C95 OEM Patek Philippe 3800 1 White “SWISS” Dial Genuine “CERAMIC” Extreme Rare Patek Philippe Authentic 18k White Gold Crown-4.54MM item# 92043 Patek Philippe Ellipse 3988J 18k Yellow Gold Swiss Quartz White Dial Men 27mm Patek Philippe Handcraft Keyring Keychain Leather Azure Blue, Ref. P1345 Rare PATEK PHILIPPE Travel Watch Box Carry Box Case Dark Brown Leather BRAND NEW Patek Philippe Porcelain Plate 2012 Collection 1909 Pocket Watch Design NM Patek Philippe Annual Calendar Complications 5396G-011 White Gold Watch Red Square Patek Philippe Suede Nautilus Aquanaut Travel Case Patek Philippe La Flamme Ladies Watch 18k Authentic PATEK PHILIPPE Hand Bag / Tote Bag VIP Gift Vintage Tiffany & Co Wrist Watch Movement Made By PP Circa 1885 Patek Philippe Calatrava Cufflinks Brand new, never used Patek Philippe Lady Ellipse 18K Yellow Gold Ref. 4226 Patek Philippe Calatrava Rose Gold White Dial Automatic Men’s Watch 3802R Patek Philippe 2016 Collection Book Volume 3 – Hardcover – With Poster Time Warrior Men’s Japan Quartz Watch Luminous, Luxury Stainless Steel AP Style Patek Philippe Calatrava White Men’s Watch 6119R-001 TK Antique 1900s Patek Philippe 18k Yellow Gold SZ6 Ladies POCKETWATCH SZ 6 *ORIGINAL PATEK PHILIPPE MATT BLACK LEATHER BAND NEW 22mm Black/White Genuine Leather Classic Watch Band Strap Rose Gold Tone Buckle Patek Philippe Travel Time 34mm White Gold White Dial Hand Wind Men Watch 5034G PATEK PHILIPPE Cal. 310sc 2576 Date Jumper NOS Patek Phillipe Service Long Box #1, mint Mens Pullover Fleece Hoodie