$9.8 Buy It Now or Best Offer
free,30-Day Returns
Seller Store atlantaprosound
(1659) 100.0%,
Location: Monroe, Georgia
Ships to: US,
Item: 175079929007
Restocking Fee:No
Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Compatible Brand:Technics
Type:Drive Belt
Compatible Model:SL-BD10, SL-BD10K, SL-BD20, SL-BD20K, SL-BD30
MPN:FRi 236
Artistic Audio:Artistic Audio
Brand New Technics SL-B280 SL-B280U Belt Welcome to Atlanta Pro Sound ••••• Under Construction – Fix Colors! ••••• Brand New Replacement Belt for Technics models SL-BD10, SL-BD10K, SL-BD20, SL-BD20K, SL-BD30, SL-BD30K. Available as Buy it Now one (1) brand new replacement belt for Technics turntable, models SL-BD10, SL-BD10K, SL-BD20, SL-BD20K, SL-BD30, and SL-BD30K. Please be sure to compare shipping prices!!! Do not get tricked into spending almost $6.00 for US First Class delivery! There is a myth that one belt fits 95% of all turntables. In reality, nothing is further from the truth. (It is also a myth that all Technics tables take the same belt!!!) A belt that is an inch too large or small will probably run on your turntable, but if it is too small, it will wear out your motor years before it would under normal conditions. If it is too large, it might also be bad for the motor, but as belts get older, they expand, so in the best case, you need a replacement years before you should. WARNING! There are people online who have been selling belts for 5-10 years. Many have lots of feedback or websites that “look” like they know what they are doing. (One guy on eBay even sells surfing supplies!) Do they really know what belt is the match for your turntable? Technics quit giving technical support on the models S-LBD10, S-LBD10K, S-LBD20, S-LBD20K, S-LBD30, S-LBD30K (including part numbers) about two decades ago. When the models S-LBD10, S-LBD10K, S-LBD20, S-LBD20K, S-LBD30, and S-LBD30K rolled off the assembly line, I was Assistant Store Manager for the largest independent Technics dealer in the Southeastern US. Read the Seller History below for more information. (In case you are wondering…I enter the model with the dash in different positions so those who search for the model can find it regardless of if they have the dash in the right place!) 5 Belt Measurements All flat rubber belts have 5 measurements that affect the belt’s performance. Length is the one most people think of right away. Length affects how tight the belt is. If it is too tight, the motor will not run (or if it is just a little too tight, the motor will wear out quickly). Width is one you might not think is important, however, the manufacturers specify this one down to the 64th of an inch! If the belt is too wide, the risk is the belt will hit the outsides of the capstan, which will create momentary bumps in the speed. If the belt is too narrow, it does not have enough contact with the capstan, causing it to slip. Either of these problems may be inaudible at first, but later? Who knows? Thickness of the belt is the smallest of the measurements. Most Turntable belts are close to the same thickness, but your parts provider who has only a decade of experience might buy their belts based on length and their cost alone. You could get a belt that they bought wholesale at 99 cents but is way too thick! A belt that is too thick will not fully fold around the capstan, causing more pitch problems. If you call to complain, you are told that your turntable has natural Wow and Flutter. Friends: These models’ Wow and Flutter is eight (8) times below the audible limit (Sources: Julian Hirsch – Hirsch-Houck Labs and the Technics models SL-B1, SL-B1A SL-B2, SL-B2A, SL-B2K SL-B3, SL-B3A, SL-B5 and SL-B5A Service Manuals). Don’t let them pull the wool over your eyes! If you hear wow and flutter (a.k.a. bad speed fluctuation), you might just have the wrong size belt! External Diameter. This one is a no-brainer, it is closely related to the thickness and internal diameter. Internal Diameter. Like #4, this one is also a no-brainer, it is closely related to the thickness and external diameter. Many old-style belts were cut to size. Modern (get it out the door as fast as you can) cutting techniques can lead to inconsistencies and inferior product. This belt is not cut, it is precision molded to meet original factory specifications for the Technics SL-BD10, SL-BD10K, SL-BD20, SL-BD20K, SL-BD30, and SL-BD30K. The belt you are about to receive was recently manufactured by the same company that made the first belts for the Technics models SL-BD10, SL-BD10K, SL-BD20, SL-BD20K, SL-BD30, and SL-BD30K. My distributor, Artistic Audio of Atlanta, buys thousands of belts made by this company and has been sending them all over the United States for years. Every few of weeks Artistic Audio of Atlanta reorders belts buy (pun intended!) the hundred, replacing the stock they have sold. No belt is on their shelf more than a few weeks. Because they come into the distributor regularly, I can personally guarantee that the belt you get is fresh! About these Models: The SL-BD10 is a fully manual belt drive turntable that was designed to operate at 33 and 45 RPMs. It has a straight tone arm and required a P-Mount (T4P) Cartridge. It is fully manual, which means that you have to move the tone arm over to the record. After the record is complete, the turntable continues to play, as there is no auto pickup or auto shutoff (hence the designation, fully manual. The speed switch (far left) on the SLBD22 was two position, 33, 45 with no neutral position between them. If the turntable is plugged in and the belt is fresh, then it will start up when you activate the on/off switch (moving the arm does not start rotation, use the on/off switch). On the far right is the power switch that I have been discussing…. Pressing this switch will start platter rotation if it is off and stop platter rotation if it is on. The SLBD10 does not have a pitch control or a strobe light (it would be on the front left, in the little square next to the platter). The turntable has a sleek, streamlined “Technics Black” (really sort of a dark chocolate color) body and the controls are in front. There was a dust cover with the original model. The RCA cable and the power cable detach, they plug in on the rear of the turntable chassis. The designation SL-BD10K was an identical turntable to the SL-BD10, but there was a Technics cartridge pre-installed when it left the factory. These were popular because the sales weasel did not have to open the box and install the customer’s cartridge. The only places the designation was noted was on the catalogue, the dealer price sheets, and on the invoices. The SL-BD20 is a semi-automatic belt drive turntable that was designed to operate at 33 and 45 RPMs. It has a straight tone arm and required a P-Mount (T4P) Cartridge. It is semi-automatic, which means that you have to move the tone arm over to the record. After the record is complete, the turntable picks the arm up and returns to the off position. The speed switch (far left) on the SLBD20 was two position, 33, 45 with no neutral position between them. If the turntable is plugged in and the belt is fresh, then it will start up when you move the arm over to the record (moving the arm activates a switch that starts the rotation). Where people expect a power switch, there is a switch that says “Stop”. Pressing this switch will send the turntable into the cut-off mode. The SLBD20 does not have a pitch control or a strobe light (it would be on the front left, in the little square next to the platter). The turntable has a sleek, streamlined “Technics Black” (really sort of a dark chocolate color) body and the controls are in front. There was a dust cover with the original model. The RCA cable and the power cable detach, they plug in on the rear of the turntable chassis. The designation SL-BD20K was an identical turntable to the SL-BD20, but there was a Technics cartridge pre-installed when it left the factory. These were popular because the sales weasel did not have to open the box and install the customer’s cartridge. The only places the designation was noted was on the catalogue, the dealer price sheets, and on the invoices. The SL-BD30 is a fully-automatic belt drive turntable that was designed to operate at 33 and 45 RPMs. It has a straight tone arm and required a P-Mount (T4P) Cartridge. It is fully-automatic, which means that you press the Start/Stop button (far right) to move the tone arm over to the record. After the record is complete, the turntable picks the arm up and returns to the off position. The speed switch (far left) on the SLBD30 was two position, 33, 45 with no neutral position between them. If the turntable is plugged in and the belt is fresh, then it will start up when you press the start button. Where people expect a power switch, there is a switch that says “Start/Stop”. Pressing this switch while the turntable is playing will send the turntable into the cut-off mode. The SLBD30 does not have a pitch control or a strobe light (it would be on the front left, in the little square next to the platter). The turntable has a sleek, streamlined “Technics Black” (really sort of a dark chocolate color) body and the controls are in front. There was a dust cover with the original model. The RCA cable and the power cable detach, they plug in on the rear of the turntable chassis. While the SL-BD30 and 30K were introduced with the SL-BD22 and 22K, the 33 and 33K were only offered a few years. The 22 and 22K continued for as long as Technics continued to sell belt drive turntables. Most people’s best guess is that the 33 and 33K commanded a higher price, yet the consumers buying turntables were in “economy” mode, consumers spent as little as possible on what they considered a dying format with CD players sales on the increase. The really ironic thing is that now you have to look for a CD player (anyone bought one lately?) and heaven knows you can’t find a good one! New turntables sales , on the other hand, are significantly higher. The designation SL-BD30K was an identical turntable to the SL-BD30, but there was a Technics cartridge pre-installed when it left the factory. These were popular because the sales weasel did not have to open the box and install the customer’s cartridge. The only places the designation was noted was on the catalogue, the dealer price sheets, and on the invoices. Are you about to purchase one of these models? The motor and drive system are built like a tank. Seeing it run may be your least concern. Here is what I check before buying: It should have a cartridge (T4P-style that plugs directly into the arm). Cartridges are metal and plastic pieces that (in these models) plug directly into the arm. Cartridges also hold the stylus/needle. If you have a cartridge, but no stylus or needle, contact me where it says “Ask Seller a Question, and ask, I probably have your stylus in stock. It should have a counterbalance (weight on the part of the arm furthest from the record). Sometimes the counterbalance gets knocked off in shipping (it happens when people ship these and do not know how to pack them to prevent this very thing!) Without the counterbalance, the turntable is worth only the money for parts. It can not be reattached, and buying a tonearm is not possible, unless you get one for parts). The cartridge should have a stylus. Styluses are “needles” that have the piece that touches the grove and plays the record. Look at the stylus. Does it have a piece of metal that lowers to the record, and is there a tip on the end of it? There are too many kinds of styluses to list them all on eBay. I have about 2,000 in stock, I probably have the one you need. If you need a stylus, click on “Ask Seller a Question” to send me a message. The last one is really easy to check as well. There is a black plastic bar in front of the place where the tonearm pivots. That is the arm lifter. It should move up and down when you change the position of the “cue” switch (front right) You may have heard someone say that the sound of vinyl sounds better than CDs. “How can this be?” you may wonder…the CDs do not have that scratchy sound. It is a matter of detail, really. You can prove it yourself with a $20.00 thrift-store turntable and a generic stylus. Get a copy of something easy to get, something acoustic, something like James Taylor’s, Carly Simon’s or Carol King’s greatest hits. (The demonstration works best with acoustic guitar, harp or lute, but once you have noticed the difference, you will be able to hear the difference on everything! The introduction to Ventura Highway by America will work well also.) Play it on your turntable, and listen especially to the very beginnings of each note in the guitar. Focus your attention to the very beginnings of each plucked string. The strings will sound almost like you can hear each of them roll off of the player’s fingers. That is the way it should sound all of the time. Now, play the same selection on a CD. You will probably notice that the beginnings of the notes sound muffled or slow. The beginnings of the notes on the CD have much less detail than their counterparts on vinyl. The reason is built into the way CD players work. CDs have a sampling rate of 44,100 samples per second. What this means is the volume level of a given sound is recorded at that frequency. ••••• Under Construction – Insert New Table Here! ••••• While the volume of the actual string is getting progressively louder, the volume on the CD recording is an average. As a note quickly gets louder, the CD sounds like stair steps, because we have a recording of averages for the length of time of the sample. This is why the vinyl sounds more like the original sound than the CD. Once you hear this, you will always look at listening for detail in the sound differently. Buying a new belt so you can transfer all your vinyl to CD? If you have read and understand the previous section, then you might want to re-think. The CD recording you make can not possibly sound the same as the vinyl, because in making the recording, you are creating the same stair-stepping sound that does not sound as good as the original vinyl! OK, OK, if you want to make CDs for the car, go ahead, but if you want to make CDs for detailed listening, maybe you should keep your vinyl. Georgia Residents will pay 7% Sales Tax. Shipping and handling is only $1.99 to any point in the USA. Belts are shipped by USPS Ground Advantage (2-5 Day expected delivery). Please, ask in advance about international shipping. Priority Mail shipping to the US is available for $9.65. Most items are shipped within 1 business day. Thanks in advance for your purchase!
Frequently Asked Questions About High Quality Belt for Technics SL-BD10 SLBD20 SL-BD20 SL-BD20K SL-BD30 SL-BD30K in My Website
www.deafgirlsrescue.org is the best online shopping platform where you can buy High Quality Belt for Technics SL-BD10 SLBD20 SL-BD20 SL-BD20K SL-BD30 SL-BD30K from renowned brand(s). www.deafgirlsrescue.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling High Quality Belt for Technics SL-BD10 SLBD20 SL-BD20 SL-BD20K SL-BD30 SL-BD30K on www.deafgirlsrescue.org?
www.deafgirlsrescue.org helps you to shop online and delivers Patek Philippe to your doorstep. The best-selling Patek Philippe on www.deafgirlsrescue.org are: PATEK PHILIPPE genuine Archives Certificate Guarantee Of Origin Calatrava 3420 Patek Philippe Cal 10 110 part 401 stem NOS Vintage Magazine Lot: Patek Philippe & Colors Collection, Rare Finds #3300 patek philippe 4831 Complete authentic set Patek Philippe Complications 5054J With Archives 18K Yellow Automatic Watch 36mm Patek Philippe Complications World Time Auto White Gold Mens Watch 5231G-001 PATEK PHILIPPE Grand Complication 3970EJ-053 watch men TO157659 NEW Patek Philippe International Vol 5 #3 Ref. 5940 Nicholas Foulkes Auctions PATEK PHILIPPE Gondolo 4224/3 Ladies #GZ118 Rare Patek Philippe Naviquartz Desk Clock in Working Condition Authentic Patek Philippe Calatrava Travel Time 5134j Booklet Manual Cover SET Ermenegildo Zegna Patek Philippe Collaboration Mens Luxury Silk Tie 2002 Patek Philippe Aquanaut NOS Green Strap C92 Men Size PATEK PHILIPPE Leather Travel Watch Case Pouch Dark Brown New and unused ORIG Patek Philippe Calibres 12-600, 10-200 CENTER WHEEL WATCH PART CENTRE Watch Sapphire Crystal Glass for Patek Philippe Nautilus 4700/4970 18.5*18.5mm Patek Phillipe 21x18MM Uncut Green Rubber Strap: 5167a, 5167r, 5164a, 5164r 18k White Gold Patek Philippe With Diamond Bezel Watch Reference 3491 Patek Philippe International Vol 4 #2 Bernard Buffet Ref. 2526 Letter T. Stern Vintage 34mm LeCoultre Power Reserve Men’s Bumper Automatic Wristwatch 481 Patek Philippe M39743: 18k Rose Gold Nautilus, Watch Ref. 5712R, Box and Papers Patek Philippe Gondolo Tonneau Automatic 5030J 18K Gold Mens Watch 34x41mm B&P Original Patek Philippe Nautilus 5711g 18k Gold 40mm Case, Crystal and End Links Patek Philippe Nautilus Steel Automatic 40mm Bracelet Watch 5711/1A-001 Patek Philippe Annual Calendar Regulator 5235G White Gold Silver Dial – FULL SET Patek Philippe 5738R-001 Golden Ellipse Black Dial Watch Authentic Patek Philippe 20mm x 16mm Shiny Black Alligator Watch Strap B B38 OEM Patek Philippe Gondolo 5024G watch men TO149907 discount PATEK PHILIPPE Calatrava Ref.3426 Cal.23-300 Men’s I#131416 Vintage PATEK Philippe 18kt Buckle And Band 16mm. PATEK PHILIPPE 315SC Part 771 Mainspring To Fit NOS Patek Philippe World Time 18KRG 5230R-012 watch men TO170273 Patek Philippe Silk Men’s Tie BNIB Fast Ship! VIP GIFT Navy Blue Authentic 2023 Patek Philippe Cal 23-300 Watch Movement Spares Vintage Patek Philippe Box 3970 3940 Cherry Wood Leather Patek Philippe watch box case travel carry case dark brown leather Patek Philippe Patekphilppe genuine leather belt dark brown watch #KN929 PATEK PHILIPPE Tiffany ED KOEHN pocket watch movement 39mm Patek Philippe calibre 320 Barrel Complete with mainspring. genuine new Swiss Ma PATEK PHILIPPE 28-255 PART 1485/1 REVERSER MOUNTED NEW ORIGINAL PP Patek Philippe Neptune Moonphase Power Reserve Steel Mens Watch 5085 Papers Look 18 MM Pin Buckle Clasp Watch Leather Rubber Strap Fits for Patek Philippe Gold PATEK PHILIPPE Luxury Watch SOFTCOVER CATALOG 2020 2021 – 108 Pages Patek Philippe: Complicated Wrist Watches (German, English and French Edition) patek philippe Calatrava 3923A watch men TO01197 …PATEK PHILIPPE INTERNATIONAL MAGAZINE Number 11 (2002) Patek Philippe Watch Book RARE Patek Philippe Calatrava 5196R-001 watch men TO153403 Patek Philippe Collection 2002/2003 E Geneva Watch Catalog/Book Patek Philippe Calatrava 4897G-010 White Gold Diamond Hand Wound Ladies Watch Skeleton Patek Philippe Geneve Watch Mens Gold Swiss Vintage 1890s Engraved Patek Philippe Caran D’Ache Watch Ballpoint Pen With Box Brand New 2020 Tiffany & Co. Stamped Patek Philippe Box Papers White Gold 5712G-001 Patek Philippe Calatrava 3923J Men’s #W1147 Patek Philippe Calatrava Wristwatch 5120/1G-001 Gold Patek Philippe Geneve Book by Martin Huber & Alan Banbery 1982 First Edition PATEK PHILIPPE 2018 Collection Catalog w/Retail Price List Pamphlet Patek Philippe K18YG Cufflinks Luxury Men’s Ref.9002 With Guarantee card Antique Patek Philippe Dress Open Face Pocket Watch Wright Kay Detroit SN 84910 1950s Vintage Patek Philippe Oversized Gold Calatrava Mens Watch Ref 570 / 570j Patek Philippe International Magazine Lot Of 10 Volume 2 Patek Philippe 175th Anniversary Commemorative Watches Catalog *FACTORY SEALED* Patek Philippe Calatrava 33 18K Yellow Gold Champagne Gold Bracelet Watch | BOX Patek Philippe Journal Notebook Paper Notepad AD VIP Gift 14 MM Spring Bar Pin Buckle Watch Leather Rubber Strap Fits For Patek Philippe Patek Philippe 3634 Jumbo Golden Ellipse ONYX Dial 1973 Watch Serviced Box Paper Patek Philippe Lady Wrist Watch Movement 854887, Not working For Parts, See Note Patek Philippe 5167A Black Rubber Strap C09 21x18mm OEM 5167 Authentic Patek Philippe Geneve Black Leather Watch Strap 17. 9 x 16mm, 11.5+7.5 Patek Philippe Gondolo Pocket Watch Face 22 Lines 2009 Mint Patek Philippe 7119G-001 31mm 18K White Gold Gray Dial Unisex Watch Patek Philippe Calatrava 5117J-001 automatic date mens wristwatch 18K solid gold Patek Philippe Calatrava 36mm 18K Rose Gold Hand-Wind Mens Watch 5119R-001 Patek Philippe Aquanaut 5167r-001 40mm Rose Gold Brown Dial Full Set PATEK PHILIPPE CALATRAVA TRAVEL TIME 18CT GOLD REF. 5134J-001 Patek Philippe Complication 18K Yellow Gold Watch 5054J Authentic Patek Philippe 21mm x 16mm Blue Alligator Watch Strap Band D C95 OEM Patek Philippe 3800 1 White “SWISS” Dial Genuine “CERAMIC” Extreme Rare Patek Philippe Authentic 18k White Gold Crown-4.54MM item# 92043 Patek Philippe Ellipse 3988J 18k Yellow Gold Swiss Quartz White Dial Men 27mm Patek Philippe Handcraft Keyring Keychain Leather Azure Blue, Ref. P1345 Rare PATEK PHILIPPE Travel Watch Box Carry Box Case Dark Brown Leather BRAND NEW Patek Philippe Porcelain Plate 2012 Collection 1909 Pocket Watch Design NM Patek Philippe Annual Calendar Complications 5396G-011 White Gold Watch Red Square Patek Philippe Suede Nautilus Aquanaut Travel Case Patek Philippe La Flamme Ladies Watch 18k Authentic PATEK PHILIPPE Hand Bag / Tote Bag VIP Gift Vintage Tiffany & Co Wrist Watch Movement Made By PP Circa 1885 Patek Philippe Calatrava Cufflinks Brand new, never used Patek Philippe Lady Ellipse 18K Yellow Gold Ref. 4226 Patek Philippe Calatrava Rose Gold White Dial Automatic Men’s Watch 3802R Patek Philippe 2016 Collection Book Volume 3 – Hardcover – With Poster Time Warrior Men’s Japan Quartz Watch Luminous, Luxury Stainless Steel AP Style Patek Philippe Calatrava White Men’s Watch 6119R-001 TK Antique 1900s Patek Philippe 18k Yellow Gold SZ6 Ladies POCKETWATCH SZ 6 *ORIGINAL PATEK PHILIPPE MATT BLACK LEATHER BAND NEW 22mm Black/White Genuine Leather Classic Watch Band Strap Rose Gold Tone Buckle Patek Philippe Travel Time 34mm White Gold White Dial Hand Wind Men Watch 5034G PATEK PHILIPPE Cal. 310sc 2576 Date Jumper NOS Patek Phillipe Service Long Box #1, mint Mens Pullover Fleece Hoodie