MILLER WELDER ONAN MOTOR P216 P218 P220 B43 B48 FUEL PUMP.

$26.83 Buy It Now or Best Offer
free,30-Day Returns

Seller Store larrys_small_engine_salvage_1
(6590) 98.7%,

Location: Winn, Michigan
Ships to: US,
Item: 255931628254

Restocking Fee:No
Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Compatible Brand:ONAN
Power Source:Gas
Color:Black
Compatible Model:P216, P218, P220, B43, B48
Material:POLY RESIN COMPOSITE-BRASS (NOT CHEAP PLASTIC)
MPN:MILLER-WELDER-ONAN-FUEL-PUMP P216 P218 B43 B48
WALBRO REPLACEMENT:WALBRO REPLACEMENT
Type:Fuel Pump
Horsepower:16, 18, 20
Number in Pack:1
Voltage:DOES NOT APPLY
P216 P218 P220 B43 B48:P216 P218 P220 B43 B48
Country/Region of Manufacture:United States

Welcome to Larry’s Small Engines. THIS OE FUEL PUMP WILL PUMP YOUR FUEL FASTER THAN THE LITTLE ONE IN THE THIRD PHOTO.THIS PREVENTS WEAR AND TEAR ON YOUR STARTER MOTOR AND THE LIFE OF YOUR BATTERY!!! TAKE A LOOK AGAIN OF HOW MANY WE HAVE SOLD. THAT MANY SATISFIED CUSTOMERS CANNOT BE WRONG. ALL PURCHASE’S WERE FOR THE ENGINES LISTED BELOW. FOR ONAN P216G P218G P220G P224G B43E B48G B43 B48 P216, P218, P220 ENGINES ON SUCH THINGS AS MILLER WELDERS, TRACTORS, SKID STEER AND GENERATORS. READ THE 5 MINUTE DESCRIPTION BELOW BECAUSE IT WILL TELL YOU WHAT OTHER BUSINESSES WILL NOT TELL YOU! (1.) HOW TO SAVE $$$ AND MAKE YOUR FUEL PUMP LAST 2 TO 3 TIMES LONGER.(2.) WHY YOU SHOULD ONLY BUY AN OE FUEL PUMP THAT IS COMPAITABLE AND(3.) HOW TO (VERY IMPORTANT) TROUBLESHOOT YOUR PROBLEM FIRST BEFORE BUYING A FUEL PUMP. QUESTION: WANT TO DOUBLE? MORE LIKE TRIPLE THE LIFE OF YOUR FUEL PUMP?ANSWER: THEN STOP USING FUEL WITH ANY ETHANOL IN IT! OTHER BUSINESS’S WILL NOT TELL YOU SO WE WILL!!!…ETHANOL EATS AWAY AT THIN RUBBER AND THIN PLASTIC.FUEL WITH ETHANOL IN IT WAS NOT MADE FOR YOUR SMALL ENGINE. DEFINETLY NOT MADE FOR THE FUEL PUMP TO HAVE IT RAN THRU IT. ETHANOL WILL EVENTUALLY START EATTING AWAY AT YOUR CARBURETOR COMPONETS AS WELL, LIKE THE NEEDLE SEAT AND BOWL GASKET!!!THERE ARE FUEL STATIONS OUT THERE THAT SELL GASOLINE WITH NO ETHANOL IN IT.SHELL FUEL STATIONS OF 93 V-POWER IS A GOOD PLACE TO START.THERE ARE OTHERS OUT THERE LIKE STANDARD OIL, AMACO AND CHEVRON FUEL STATIONS TO NAME A FEW, AS WELL AS MANY OTHERS. LOOK AT THE PUMP HANDEL! IT SHOWS RIGHT ON IT! IT WILL TELL YOU IF IT IS E-10, E-15, E-30 OR E-85. E-85 IS JUST WHAT IT MEANS! 85% ETHANOL!!!! YOUR FUEL PUMP WONT LAST BUT A COUPLE OF MONTHS AT MOST IF YOU PUT THAT E-85 IN IT. OUR OE FUEL PUMP IS COMPAITABLE WITH UP TO 10% (E-10) OF ETHANOL BUT….IT IS BEST TO USE FUEL WITH NO ETHANOL IN IT. READ THIS!!! WATCH OUT FOR THE CHINA LOOK-A-LIKE FUEL PUMPS! THERE ARE FUEL PUMPS OUT THERE THAT LOOK ALMOST IDENTICAL TO THE OE ONE YOU SEE HERE FOR YOUR ENGINE.THEM DEFECTIVE FAKES WILL NOT WORK RIGHT AND I SERIOUSLY MEAN THAT MOST DO NOT EVEN WORK AT ALL!!! LOOK AT THE LAST FEW PHOTOS TO SEE WHAT WE ARE TALKING ABOUT!THEIR INTERNAL COMPONETS ARE MADE OF SOME HORRIBLE KIND OF MATERIAL.JUST ALL AROUND NOT MADE RIGHT AT ALL!! (1.) THE DIAPRAGM IS TOO THIN AND TOO SMALL AROUND WHERE IT DOES NOT SIT RIGHT INTO THE RESSESED AREA OF WHERE IT IS SUPOSED TO. THIS CAUSES IT TO BE TOO TIGHT! IF IT IS TOO TIGHT THEN IT (THE DIAPHRAGM) CANNOT FLUCTUATE BACK AND FORTH TO PUMP THE FUEL! (2.) EVEN IF IT WAS ACIDENTLY MADE RIGHT. THE DIAPHRAGM WOULD STILL NOT BE ABLE TO WORK RIGHT DUE TO THEM NOT MAKING THE BRASS BREATHER VENT WITH THE RIGHT AIR FLOW TO ALLOW THE DIAPHRAGM TO MAKE THE MUCH NEEDEDMOVEMENT BACK AND FORTH TO PUMP THE FUEL!!! (3.) THE MATERIAL THAT THEY USED TO MAKE THE DIAPHRAGM IS NOT MADE OF THICK RUBBER. IT ACTUALLY HAS A VERY THIN LAYER OF RUBBER OVER BOTH SIDES OF LOKKS TO BE LIKE A STIFF MESH SCREEN THAT IS THIS IS MAINLY WHY THE DIAPHRAGM HAS NO DISH TO IT. THIS WILL NOT ALLOW THE DIAPHRAGM TO MAKE THE MOVEMENT THAT IT WOULD NEED. (4.) EVEN THE STIFFER (LARGER WIRE DIAMETER) SPRING THEY USED TO PUSH THE DIAPHRAGM BACK WILL NOT ALLOW THE ENGINES PISTON TO MAKE THE MOVEMENT THAT IT NEEDS TO PUMP THE FUEL!!! WITH THIS NOT WORKING CORRECTLY OR IF EVEN AT ALL, THEN IT WILL WEAR OUT YOUR STARTER MOTOR FASTER AND SHORTEN THE LIFE OF YOUR BATTERY! AGAIN, THEY ARE JUST ALL AROUND MADE WRONG!!!! THIS COUNTRY WHO THINKS THEY CAN JUST STEAL WHAT THEY THINK IS A SIMPLE DESIGN BUT HAVE NO IDEA OF HOW IT FUNCTIONS SHOULD SERIOUSLY NOT BE IN CHARGE OF HANGING A PICTURE ON A WALL! LOOK CLOSELY AT THE PHOTOS OF THIS LISTING! THAT FAKE FUEL PUMP YOU SEE IN THE LAST FEW PHOTOS WAS FROM SOMEONE WHO BOUGHT / MADE A PRIOR PURCHASE ELSWHERE AND THEN FOUND IT TO NOT WORK.THEY THEN MADE A PURCHASE FROM US AND TRIED TO DO A RETURN OF THE FAKE ONE TO US TO GET THE LARGER REFUND. LITTLE DID THEY KNOW THAT TO THE TRAINED EYE THERE IS A COUPLE OF TINY DIFFERENCES ON THE OUTSIDE APPEARENCE FROM OUR OE ONE AND THE FAKE ONES. WE CANNOT SHOW ANYONE THIS BECAUSE THEY WILL ONLY THEN TRY TO MAKE THEM LITTLE CORRECTIONS IN THE FUTURE TO WHERE IT WILL BE EVEN MORE DIFFICULT FOR US TO TELL THE DIFFERENCE FROM THE OE ONE TO THE FAKE ONE WITHOUT HAVING TO TAKE IT APART! AS FOR THEM, THEY WERE REPORTED, THERE WAS NO REFUND GIVEN AND THEY WERE THEN BLOCKED FROM EVER TRYING TO MAKE ANY FUTURE PURCHASES FROM US AGAIN! THE BOTTOM-LINE IS…. HAS CHINA MADE ANYTHING AT ALL TO LAST OR TO BENIFIT ANY OF US HERE IN THE USA? THE ONLY REAL CONTRIBUTION THEY HAVE MADE TO THIS COUNTRY IS OF THEIR JUNK BEING STUFFED INTO OUR LANDFILLS!!! OUR PUMP (LITTLE SECRET) IS EVEN DIFFERENT FROM OUR OWN PHOTOS JUST TO THROW THEM OFF!YOU WILL NOTICE THAT RIGHT AWAY ONE YOU PULL THE PUMP FROM THE BOX ANDSEE THE LETTERING ON IT! AS FOR THIS OE FUEL PUMP…. THIS OE FUEL PUMP HOUSING IS MADE OF POLY RESIN FIBER (NOT CHEAP PLASTIC).IT HAS A THICKER (NOT THIN) PIT LINER RUBBER DIAPHRAGM IN IT. THIS OE PUMP WAS MADE TO WHERE IT CAN BE CAREFULLY TAKEN APART TO BE CLEANED IF NEEDED. IT ALSO COMES WITH TINY RUBBER CAPS COVERING THE INLET, OUTLET AND VACUUM PORTS TO KEEP INSECTS FROM GETTING INSIDE TO RUIN THE DIAPHRAGM DURING STORAGE. THAT IS JUST ANOTHER PREVENTATIVE MEASURE TAKEN SO THAT OUR CUSTOMERS KNOW THAT THEY WILL RECEIVE A WORRY-FREE OE FUEL PUMP STRAIGHT OUT OF THE BOX! TAKE A LOOK BELOW AT JUST A FRACTION OF THE FEEDBACK WE’VE RECIEVED. Wish I would have bought this one first! Excellent price, quality, delivery.TY!!!……………Buyer: ptcruizerman (484) Fast shipping and great product. This was my 3rd fuel pump I purchased to get it running correctly. I specifically bought here for the quality, more expensive than the cheap garbage I got the First 2 times, but less than the wasted money for those 2 that did not work…………………………………………………………………Buyer: ch493904 (2) Better than expected Thanks………………………………………………………………………………………………..Buyer: machos0 (223)delighted with the fuel pump, nice kit that facilitates the installation. thanks!……………….Buyer: scottyrunner (556) EXCELLENT! SHOWED UNPRECEDENTED FOLLOWUP. Will buy here again………………………………………………….Buyer: curtholmes (841)Thank you very much! Perfect! Item as described, fast shipping…………………………….Buyer: furryhans (324)Great price and product! fast shipping! 5star ebayer*****…………………………………………..Buyer: cjs0058 (274) YOUR SATISFACTION IS GUARANTEED OR YOUR FULL MONEY BACK!!! INCLUDING FREE RETURN SHIPPING!!! VERY IMPORTANT BELOW. STEP BY STEP TROUBLESHOOTING BEFORE MAKING A PURCHASE! MAKE SURE YOU HAVE PLENTY OF FUEL IN YOUR GAS TANK THAT YOUR ENGINE IS ATTACHED TO NOW PULL THE FUEL LINE FROM THE FUEL PUMP AND PUT IT INTO A CLEAR QUART JAR AND LOWER IT TO THE GROUND. NOW TURN ON YOUR SHUT OFF VALVE, IF YOU HAVE NO FREE-FLOW OF FUEL THEN IT IS SAFE TO SAY THAT THERE IS SOMETHING IN THE GAS TANK LIKE GRASS, LEAVES OR DEBRIS STOPING THE FUEL FLO. THIS SHOULD GIVE YOU AN INDICATION THAT YOU MAY NOT NEED A FUEL PUMP. NOW IF YOU LOOSEN YOUR GAS TANKS FUEL CAP JUST A LITTLE AND BLOW SOME AIR INTO THE FUEL LINE GOING BACK TO THE FUEL TANK AND THEN PUT THE HOSE BACK INTO THE QUART JAR AND LOWER IT TO THE GROUND AGAIN AND YOU NOW HAVE FUEL FLOW THEN YOU KNOW THAT YOU NEED TO REMOVE THE FUEL TANK TO CLEAN IT OUT. WHY? BECAUSE WHATEVER IT WAS IS GOING TO FLOAT BACK INTO THE WAY AGAIN AND RESTRICT THE FUEL FLOW IF YOU DONT CLEAN IT OUT. LET’S SAY YOU HAD FUEL FLOW AFTER LOWERING THE LINE TO THE GROUND IN THE FIRST PLACE. THEN YOU NEED TO BLOW THROUGH THE FUEL PUMP ON THE INLET PORT. IF YOU CAN’T BLOW THROUGH IT THEN REMOVE THE LINE FROM THE FUEL PUMP THAT GOES DIRECTLY TO THE CARBURETOR. NOW TRY TO BLOW THROUGH THAT HOSE GOING IN TO THE CARBURETOR. IF YOU STILL CAN’T, THEN YOU KNOW THAT THERE IS SOMETHING PLUGGED IN THE NEEDLE SEAT AREA THAT IS INSIDE OF THE CARBURETOR. SOMETHING IS STOPPING THAT FLOW. REMOVE THE CARBURETOR AND TAKE IT TO A PROFESSIONAL TO HAVE IT SERVICED. IF YOU ARE A CERTIFIED MECHANIC THEN TAKE THE CARBURETOR APART YOURSELF AND REMOVE THE FLOAT BOWL AND NEEDLE FROM THE NEEDLE SEAT. NOW ATTACH AN AIR HOSE TO THE NEEDLE SEAT WHERE YOU PULLED THE NEEDLE OUT OF AND BLOW BACK THROUGH IT WITH AN AIR HOSE. IT SHOULD HAVE NOW BLOWN OUT WHATEVER IT WAS THAT PLUGGED IT UP. NOW REASSEMBLE THE CARBURETOR IN THE SAME MANNER IT WAS TAKEN APART AND TRY TO BLOW LOW PREASURE (WE DO IT BY MOUTH) INTO THE CARBURETOR FROM THE INLET PORT GOING IN TO THE CARBURETOR. YOUR PROBLEM SHOULD NOT BE SOLVED. NOW WHAT YOU NEED TO DO FROM YOUR FUEL TANK TO YOUR ENGINES CARBURETOR IS MAKE SURE EVERYTHING IS ASSEMBELED IN THIS ORDER…CLEAR FUEL LINE FROM GAS TANK PORT-to-FUEL SHUT OFF VALVE-to-FUEL FILTER-to-CLEAR FUEL LINE-to-FUEL PUMP-to-CLEAR FUEL LINE-to-CARBURETOR. NOW EVEN IF YOUR TRACTOR, GENERATOR, WELDER OR WHATEVER YOUR ENGINE IS ON DID NOT COME WITH A SEDIMENT BOWL ON IT THEN LISTEN CLOSELY TO A PROFESSIONAL THAT IS HERE TO SAVE YOU MONEY/TIME AND A LATER HEADAKE…. DO THIS…..FUEL TANK-to-CLEAR FUEL LINE-to-SEDIMENT BOWL-to-CLEAR FUEL LINE-to-FUEL FILTER-to-CLEAR FUEL LINE-to-FUEL PUMP-to-CLEAR FUEL LINE-to-CARB.!!!! QUESTION: WHY DO I SAY A SEDIMENT BOWL THAT WAS NEVER ON YOUR ITEM THAT YOUR ENGINE IS ON? ANSWER: A SEDIMENT BOWL PUT IN A VISUAL PLACE WHERE YOU CAN SEE IT WILL CATCH THAT WATER/CONDINSATION THAT SOMEHOW ALWAYS MAKES ITS WAY INTO YOUR FUEL FROM THE GAS STATION! THIS IS BECAUSE WATER IS HEAVIER THAN GASOLINE. THAT GLASS SEDIMENT BOWL WILL CATCH THAT (VERY LITTLE AMOUNT) OF WATER IN THAT BOWL SO IT DOES NOT MAKE ITS WAY THROUGH EVERYTHING ELSE TO GET INTO YOUR CARBURETOR AND RUIN ITS COMPONETS! THAT IN ITSELF IS BAD FOR EVERYTHING! NOW IMAGINE IF YOU ARE A PERSON THAT LIVES IN THE NORTHERN PART OF THE COUNTRY AND DEAL WITH FRIDGID COLD WINTERS,NOW YOU HAVE WATER FROZE UP IN YOUR CARBURETOR, FUEL PUMP, FUEL FILTER AND GAS TANK!!!! NOTHING WILL STOP FROZEN WATER FROM BUSTING YOUR COMPONETS IN ANYTHING ONCE IT HAS FROZEN UP!!!!!!! A SHORT NOTE ON WHAT WAS ONCE AMERICA… NOTHING THESE DAYS ARE BUILT LIKE THEY USE TO BE WHEN THE GOOD OLD AMERICAN COMPANIES WERE ALL IN COMPETITION WITH ONE ANOTHER LIKE BRIGGS, WISCONSIN, KOHLER, ONAN, CLINTON AND EVEN TECUMSEH. ALL TO BUILD THE BEST OF THE BEST AND THAT THEY PRETTY MUCH ALL DID!MOST OF THESE GOOD OLD CAST IRON DUKE ENGINES ARE STILL RUNNING TODAY! WE WERE SOLD OUT A LONG TIME AGO BY OUR VERY OWN POLITICIANS FOR A KICKBACK. CROOKS THEY ARE! THEY ARE THE ONES WHO ARE AT RESPONSABLE FOR THE FAST FILLINGS OF OUR LANDFILLS HERE IN AMERICA!THANK YOU FOR TAKING THE TIME TO READ EVERYTHING. HOPEFULLY YOU FOUND ALL OF OUR IMPORTANT INFO. HELPFUL. Specs on Fuel Pump: Fits 1/4″ Fuel LineVacuum Type Pump Not compatible with greater than 10% ethanol. AGAIN, IT IS BEST TO USE FUEL WITH NO ETHANOL IN YOUR SMALL ENGINE!!! WE SHIP EVERYDAY MONDAY – FRIDAY WITH TRACKING. MOST PACKAGES ARE SHIPPED THE SAME DAY BUT NO LATER THAN THE NEXT WORKDAY. Larry’s Small Engines We now ship Worldwide. THIS APPLIES ONLY TO THE GLOBAL SHIPPING COUNTRIES: WE DO SHIP TO THESE PLACES HOWEVER,THE COST TO SHIP TO YOUR COUNTRY HAS NOTHING TO DO WITH US. THE GLOBAL SHIPPING PROGRAM CHARGES YOU THE EXTRA FEES TO SHIP TO YOUR COUNTRY. IF WE START HAVING COMPLAINTS, WE WILL CANCEL ALL INTERNATIONAL SALES. WE ALSO HAVE NO CONTROL WITH CUSTOMS HOLDING UP THE MAIL SO PLEASE BE PATIENT.IF WE START HAVING PROBLEMS WITH INTERNATIONAL CUSTOMERS OVER THE TIME FRAME OF WAITING FOR THEIR PACKAGES WE WILL CANCEL ALL INTERNATIONAL SALES.AGAIN. WE HAVE NO CONTROL OVER CUSTOMS HOLDING UP THE MAIL.

Frequently Asked Questions About MILLER WELDER ONAN MOTOR P216 P218 P220 B43 B48 FUEL PUMP. in My Website

www.deafgirlsrescue.org is the best online shopping platform where you can buy MILLER WELDER ONAN MOTOR P216 P218 P220 B43 B48 FUEL PUMP. from renowned brand(s). www.deafgirlsrescue.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling MILLER WELDER ONAN MOTOR P216 P218 P220 B43 B48 FUEL PUMP. on www.deafgirlsrescue.org?

MILLER WELDER ONAN MOTOR P216 P218 P220 B43 B48 FUEL PUMP.

Frequently Asked Questions About MILLER WELDER ONAN MOTOR P216 P218 P220 B43 B48 FUEL PUMP. in My Website

What are the best-selling MILLER WELDER ONAN MOTOR P216 P218 P220 B43 B48 FUEL PUMP. on www.deafgirlsrescue.org?

Leave a Reply Cancel reply