DDC-431 5V/12V LED Automation Delay Timer Controller Switch Relay Module Display-

$4.69 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location:
Ships to: US,
Item: 264972729013

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Unbranded:Unbranded
UPC:Does not apply
EAN:Does not apply
Country/Region of Manufacture:China
MPN:Does not apply
Type:DDC-431
Working voltage:DC6V-DC30V
Marca:– Senza marca/Generico –
Working Temperature:-40 ° C ~ 85 ° C
Marque:– Sans marque/Générique –
Numéro de pièce fabricant:Non applicable
Product size:64mm*35mm*19.3mm

eBay DDC-431 5V/12V LED Automation Delay Timer Controller Switch Relay Module Display Delay Relay Highlights: 1. Wide voltage power supply (6 ~ 30V), supports microUSB 5.0V power supply, easy to use; 2. The interface is clear and simple, powerful, easy to understand, meet almost all your needs; 3. The emergency stop function (“STOP” key);With reverse polarity protection, reverse polarity will not burn the product. 4. Increase the sleep mode, if this mode is enabled, without any operation within 5 minutes, then automatically turn off the monitor, any key wake-up; 5. You can set a different OP, CL, LOP parameters, which are independent of each other, and are automatically saved; 6. After the module is powered down, all parameter settings are not lost. Product parameters: 1: Operating voltage: 6–30V, support microUSB 5.0V power supply 2: Trigger Source: Active-high (3.0V-24V), have optocoupler isolation, can improve the system’s anti-jamming capability (customers can also shorting common ground). 3: Output capability: You can control the DC 30VDC 5A or 220VAC 5A device. 4: Quiescent Current: 20mA; Operating Current: 50mA 5: life: more than 10 million times; Working temperature: -40-85 ℃; Size: 6: with optocoupler isolation, enhanced anti-jamming capability, industrial grade board. Special Note: The relay outputs are passive contact, just a switch. Package Included : 1 x Micro USB 5V LED Automation Delay Timer Control Switch Relay Module Display Delay Relay with Case Description： This relay delay control board has a powerful and clear interface, powerful function, one-button emergency stop function (STOP button), with reverse connection protection, reverse connection without burning, power-off memory. Increased sleep mode, after enabling, No operation within 5 minutes, automatically turn off the display, wake up any button! You can set different OP, CL, LOP parameters, these parameters are independent of each other, save the setting parameters automatically power-down save and other functions, almost meet all needs! Product manual： Working voltage: DC6V-DC30V (wide voltage anti-connection protection) Trigger signal source: high-level trigger DC 3.0V—24V signal ground and system ground to improve the system’s anti-interference ability can also short-circuit the ground Output capacity: controllable DC 30V/10A or AC 250V/10A equipment Product size: 64mm*35mm*19.3mm Mounting hole: diameter 3mm Working temperature: -40 ° C ~ 85 ° C Operating mode： P1 mode: After the signal is triggered, the relay turns on the OP time, then turns off; in the OP time, the following operation P1.1: The signal is triggered again. P1.2: Signal triggers re-timed again P1.3: The signal triggers reset again, the relay is disconnected, and the timing is stopped. P-2: Give the trigger signal, after the relay turns off the CL time, the relay turns on the OP time. After the timing is completed, the relay is turned off. P3.1: Give the trigger signal, after the relay turns on the OP time, the relay turns off the CL time, then loops the above action, the signal is given again in the cycle, the relay is disconnected, the timing is stopped; the number of cycles (LOP) can be set P3.2: No trigger signal is required after power-on, the relay turns on OP time, the relay turns off CL time, and the above actions are cycled; the number of cycles (LOP) can be set P-4: Signal hold function If there is a trigger signal, the timing is cleared, the relay remains on; when the signal disappears, the relay is turned off after timing the OP; during the timing, there is a signal, and the timing is cleared. Relay enable mode： ON : The relay is allowed to conduct during the OP conduction time. OFF : The relay is prohibited from being turned on and is always off. Short press the STOP button on the main interface to switch between ON and OFF. The current state will flash, then return to the main interface. This function is the emergency stop function, one button to open and close the relay. Sleep mode (long press the stop button to view the current mode)： C-P sleep mode: within five minutes, without any operation, the digital tube automatically turns off the display, the program runs normally. O-d normal mode: the digital tube is always on display Press and hold the STOP button for 2 seconds and then release to switch the C-P and O-d states. The current state will flash and then return to the main interface. Timing range How to choose the timing range After setting the parameter value in the mode selection interface, press the STOP button to select the timing range. XXX. Decimal point is in one place, timing range: 1 second to 999 seconds XX.X decimal point in ten, timing range: 0.1 seconds to 99.9 seconds X.X.X. The decimal point is fully illuminated, the timing range is from 1 minute to 999 minutes. For example, if you want to set the OP to 3.2 seconds, move the decimal point to ten digits, and the digital tube displays 03.2. Parameter description: OP on time, CL off time, LOP cycle number 1-999 times, “—” stands for infinite loop These parameters are independent of each other, but each mode shares these parameters. For example, when the on-time OP is set to 5 seconds in P1.1, the user wants to switch to the P1.2 mode, then when entering the P1.2 setting corresponding parameters, the OP also Will be 5 seconds Displaying 000 on the main interface and pressing the SET button will display OPL, LOP and corresponding time XXX If only OP in the mode, such as mode P1.1, P1.2, P1.3 time, then short press SET button will only display OP and corresponding time If the mode has OP, CL, LOP such as mode P3.1, P3.2 short press SET button will display OP and corresponding time, CL and corresponding time, LOP and corresponding times After setting the mode, it is very convenient to view the parameters set in the current mode by pressing the SET button on the main interface. How to set parameters 1) First determine the working mode of the relay According to the working mode of the relay, in the main interface (when the module is powered on, it will flash the current working mode (default P1.1 mode), then enter the main interface “press and hold the SET button for 2 seconds and then release” to enter the mode selection. Interface, select the mode to be set by short pressing the UP and DOWN buttons. P1.1~P-4 2) After selecting the mode to be set (for example, P3.2), press the SET button to set the corresponding parameter. At this time, the parameter to be set will flash OP ON time, CL OFF time, LOP cycle number “—” Represents an infinite loop, adjusts the parameter value through UP and DOWN, supports long press (rapid increase or decrease) and short press (increase or decrease 1 unit); after setting the parameter value, select the decimal point position by short pressing the STOP button. , select the timing range (corresponding time 0.1 seconds ~ 999 minutes); short press the SET button to set the next parameter of the current mode, the process is the same as above 3) After setting the parameters of the selected mode, press and hold the SET button for 2 seconds to release, the currently set mode will flash, then return to the main interface and set the parameters successfully. 4) Main interface: “000” (no decimal point) is displayed when the relay is not working, and the decimal point is clear when the relay is working. 5) Mode selection interface: long press SET button to enter, after setting is completed, long press SET button to exit, return to the main interface. Package Included: 1*USB DDC-431 DC6V-DC30V Relay Delay Controller MOS Switch Digital LED Display Payment Method Returns Policy Feedback Payment Method 1. PayPal payment accepted only. 2. Items will be shipped to your eBay address. Please make sure it is correct. Returns Policy 1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase. 2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer. 3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner. 4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response. Feedback When you satisfied with our product and services please leave us positive feedback. If a problem occurs, contact us immediately with any email request. Just contact us using the ” Ask the seller a question” link on eBay. Am 05.01.21 hat der Verkäufer die folgenden Angaben hinzugefügt:

Frequently Asked Questions About DDC-431 5V/12V LED Automation Delay Timer Controller Switch Relay Module Display- in My Website

www.deafgirlsrescue.org is the best online shopping platform where you can buy DDC-431 5V/12V LED Automation Delay Timer Controller Switch Relay Module Display- from renowned brand(s). www.deafgirlsrescue.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling DDC-431 5V/12V LED Automation Delay Timer Controller Switch Relay Module Display- on www.deafgirlsrescue.org?

DDC-431 5V/12V LED Automation Delay Timer Controller Switch Relay Module Display-

Frequently Asked Questions About DDC-431 5V/12V LED Automation Delay Timer Controller Switch Relay Module Display- in My Website

What are the best-selling DDC-431 5V/12V LED Automation Delay Timer Controller Switch Relay Module Display- on www.deafgirlsrescue.org?

Leave a Reply Cancel reply