Dodge Dana 60 Rear Disc Brake Bracket Conversion Kit

$54.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store hd4xparts
(614) 100.0%,

Location: Lafayette, Colorado
Ships to: US,
Item: 173759677106

Restocking Fee:15%
Return shipping will be paid by:Buyer
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Country/Region of Manufacture:United States
Surface Finish:Bare Steel
Manufacturer Part Number:Does Not Apply
Placement on Vehicle:Rear
HD4x4Parts:HD4x4Parts
Manufacturer Warranty:No Warranty

Product- You get both brackets and six grade 8 bolts and zinc plated lock washers & nuts. We do NOT supply the rotors, loaded calipers (constitutes: calipers, pads and slide pins) or the flex hoses (you must run flex hoses with this kit and adapt to your hard line). All of these components should be acquired from the front end of a mid 1970’s GM 3/4 ton 4×4 pickup., your local Napa will be able to acquire these for you or any other reputable dealer such as Rock Auto. If you need actual part numbers for these parts I can provide them. The calipers are the large single piston design. These disc brake brackets will accept the common 1976-1978 Cadillac Eldorado rear calipers that have a built in mechanical actuated E-brake. Below is a list of what is included with each purchase, you will not be receiving anything else in this purchase. 2 pieces 3/8″ thick laser cut brackets from 1020 steel with tapped caliper mount holes6 pieces of 1/2-20 grade 8 zinc plated x 1 1/2″ long hex head bolts6 pieces of 1/2-20 grade 8 zinc plated standard nut6 pieces of 1/2″ standard grade 2 lock washer zinc plated Fit- This universal setup will fit the rock solid Dana 60 / 70 full float rear axle. These brackets share the two standard 60 / 70 axle tube drum brake backing mount patterns taking the guesswork out of which setup you have under your truck. It also allows you to plan your build ahead or piece it together over time as the funds present themselves. Blow or twist the rear axle and you now do not have to worry if this kit will fit the next 60 / 70 axle you find a good deal on. Standard three bolt bracket machined and fabricated, it will be a direct bolt up to your existing axle tube end flange if you have a Dana 60 rear axle. If you have a Dana 70 it will bolt up but depending on year, make and model / hub style you may need tubing spacers. If you know how long we can provide them cut to length at an additional cost, please send me a message for details on these spacers. Depending on your hub you may need to source new studs and or drill the stud holes slightly larger on the hub or rotor to make them match for the stud you are using. There are many variations to the Dana 70 rear axle when it comes to hub and spacing out from the axle tube drum flange. We have dealt with these for many years giving us a leg up on our competitors. Second Generation Dodge Truck Dana 60 rear axles owners please read:The only potential issue we have ever encountered in 20 years of producing parts for any Dana 60 rear axle are on a small number of the second generation Dodge Dana 60 rear truck axles. In this very small percentage of axles we have found that a few need our bracket to sit exactly where the axle tube end flange is located. Realize just because you may have a second generation Dodge Dana 60 rear axle does not necessarily mean yours will have this issue. In these rare instances we have another rotor that other customers have used with success however you may also be required to run short tube spacers between the bracket and axle tube end flange. As with the Dana 70 axles we can cut and provide these for an additional fee if the situation deems this necessary. At present time without mocking up the rotor and caliper combo on your axle I have no other way to verify if your axle is affected. Material and Finish- Machined for a precision fit from 1020 Steel and shipped clean and free of burrs. Product will come in bare steel and coatings can be added by customer at their own discretion. Inventory- Product is stocked ready for shipment on the shelf with normally a 1 day turn and free shipping provided via USPS flat rate mail. Last- We are here to be of service to you our customers and strive for 100% satisfaction. We believe in fair and honest business practices and try to make sure you the customer are well informed before spending your hard earned money. Thank you for the opportunity.

Frequently Asked Questions About Dodge Dana 60 Rear Disc Brake Bracket Conversion Kit in My Website

www.deafgirlsrescue.org is the best online shopping platform where you can buy Dodge Dana 60 Rear Disc Brake Bracket Conversion Kit from renowned brand(s). www.deafgirlsrescue.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Dodge Dana 60 Rear Disc Brake Bracket Conversion Kit on www.deafgirlsrescue.org?

Dodge Dana 60 Rear Disc Brake Bracket Conversion Kit

Frequently Asked Questions About Dodge Dana 60 Rear Disc Brake Bracket Conversion Kit in My Website

What are the best-selling Dodge Dana 60 Rear Disc Brake Bracket Conversion Kit on www.deafgirlsrescue.org?

Leave a Reply Cancel reply