E3D High Flow Obsidian Hot End for Bambu Lab Printers X1 and P1 Series (X1C P1P

$86.39 Buy It Now or Best Offer
free,30-Day Returns

Seller Store west3d
(484) 100.0%,

Location: Beaverton, Oregon
Ships to: US,
Item: 116107276495

Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Return policy details:
E3D:E3D
Type:N/A

E3D High Flow Obsidian Hot End for Bambu Lab Printers X1 and P1 Series (X1C P1P etc.) – Fully Assembled and Self Assembled Kits E3D & Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date. High Flow. There’s no denying that the Bambu Lab X1 and P1 series printers are built for speed. However, the motion system, as remarkable as it is, has headroom to be even better. That’s where E3D High Flow technology comes in. Using our internal nozzle modification, we’ve managed to increase the volumetric flow rate of the HotEnd by 60%! That means you can expect more reliable and consistent extrusion at the same speeds or bump up the volumetric flow rate limit in the slicer to utilise the motion systems’ capabilities fully. Smooth and Hard. We’ve applied our E3DLC™ coating to the nozzle and heater parts, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle. No compromise. All of these new additions come in the same form factor as your stock Bambu; simply reuse your temperature sensor and heater pads, and it drops in place with no adjustment to the mount or part cooling required. Compatibility. The E3D High Flow HotEnd is compatible with the X1, X1 Carbon, P1S, and P1P. Filament Diameter: 1.75 mm Compatibility: Bambu Lab X1, X1 Carbon, X1E, P1S and P1P printers What’s included? 1 x Bambu Lab High Flow ObXidian HotEnd 0.40 mm or 0.60mm 1 x Thermal Grease 1 x Bambu Lab Sock 1 x Bambu Lab Heater Retaining Spring 2 x Bambu Lab Bolts Bambu Lab X1 Upgrade Guide Bambu Lab P1P/P1S Upgrade Guide FAQ What is the maximum printing temperature? 300 °C Can you cold pull the E3D ObX HF Bambu HotEnd? Yes, you can! The ObXidian coating is designed to withstand the force of a cold pull, however it can be a little bit challenging compared to a typical nozzle due to the internal construction. Are there any material limitations? Any filament you can print with our Revo and V6 ObXidian nozzles can be used with this upgrade. Typically aimed at fibre filled filaments, glow in the dark and glitter filled filaments, these nozzles should provide you a reliable choice. Short periods of metal and ceramic filled filaments can be used but may still wear over prolonged use. Do I need to PID tune when I upgrade to the E3D ObX HF Bambu HotEnd? No, you don’t need to! Is this compatible with E3D Revo Nozzles? These Hotends are designed to maintain the exact same form factor as the stock Bambu nozzles and are therefore not compatible with the Revo range of nozzles. If this is something you are interested in we recommend you have a look at the Revo Panda, which is a Revo compatible HotEnd by Biqu. E3D High Flow Obsidian Hot End for Bambu Lab Printers X1 and P1 Series (X1C P1P etc.) – Fully Assembled and Self Assembled Kits E3D & Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date. High Flow. There’s no denying that the Bambu Lab X1 and P1 series printers are built for speed. However, the motion system, as remarkable as it is, has headroom to be even better. That’s where E3D High Flow technology comes in. Using our internal nozzle modification, we’ve managed to increase the volumetric flow rate of the HotEnd by 60%! That means you can expect more reliable and consistent extrusion at the same speeds or bump up the volumetric flow rate limit in the slicer to utilise the motion systems’ capabilities fully. Smooth and Hard. We’ve applied our E3DLC™ coating to the nozzle and heater parts, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle. No compromise. All of these new additions come in the same form factor as your stock Bambu; simply reuse your temperature sensor and heater pads, and it drops in place with no adjustment to the mount or part cooling required. Compatibility. The E3D High Flow HotEnd is compatible with the X1, X1 Carbon, P1S, and P1P. Filament Diameter: 1.75 mm Compatibility: Bambu Lab X1, X1 Carbon, X1E, P1S and P1P printers What’s included? 1 x Bambu Lab High Flow ObXidian HotEnd 0.40 mm or 0.60mm 1 x Thermal Grease 1 x Bambu Lab Sock 1 x Bambu Lab Heater Retaining Spring 2 x Bambu Lab Bolts Bambu Lab X1 Upgrade Guide Bambu Lab P1P/P1S Upgrade Guide FAQ What is the maximum printing temperature? 300 °C Can you cold pull the E3D ObX HF Bambu HotEnd? Yes, you can! The ObXidian coating is designed to withstand the force of a cold pull, however it can be a little bit challenging compared to a typical nozzle due to the internal construction. Are there any material limitations? Any filament you can print with our Revo and V6 ObXidian nozzles can be uséd with this upgrade. Typically aimed at fibre filled filaments, glow in the dark and glitter filled filaments, these nozzles should provide you a reliable choice. Short periods of metal and ceramic filled filaments can be uséd but may still wear over prolonged use. Do I need to PID tune when I upgrade to the E3D ObX HF Bambu HotEnd? No, you don’t need to! Is this compatible with E3D Revo Nozzles? These Hotends are designed to maintain the exact same form factor as the stock Bambu nozzles and are therefore not compatible with the Revo range of nozzles. If this is something you are interested in we recommend you have a look at the Revo Panda, which is a Revo compatible HotEnd by Biqu. &times &times &times &times &times &times Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting “Buy It Now” or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination’s state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like AMBROSIA Über ABS Filament of the Gods – 1KG Bambu AMS Friendly Cardboard Spools AMBROSIA ASA Galactic Filament of the Gods (Glitter / Sparkle) – 1KG Bambu AMS F AMBROSIA PETG Filament of the Gods – 1KG Bambu AMS Friendly Cardboard Spools Pre AMBROSIA PLA Filament of the Gods – 1KG Bambu AMS Friendly Cardboard Spools Prem Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © West3D Printing Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting “Buy It Now” or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination’s state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Seller will pay for return shipping. eBay integration by

Frequently Asked Questions About E3D High Flow Obsidian Hot End for Bambu Lab Printers X1 and P1 Series (X1C P1P in My Website

www.deafgirlsrescue.org is the best online shopping platform where you can buy E3D High Flow Obsidian Hot End for Bambu Lab Printers X1 and P1 Series (X1C P1P from renowned brand(s). www.deafgirlsrescue.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling E3D High Flow Obsidian Hot End for Bambu Lab Printers X1 and P1 Series (X1C P1P on www.deafgirlsrescue.org?

E3D High Flow Obsidian Hot End for Bambu Lab Printers X1 and P1 Series (X1C P1P

Frequently Asked Questions About E3D High Flow Obsidian Hot End for Bambu Lab Printers X1 and P1 Series (X1C P1P in My Website

What are the best-selling E3D High Flow Obsidian Hot End for Bambu Lab Printers X1 and P1 Series (X1C P1P on www.deafgirlsrescue.org?

Leave a Reply Cancel reply