$85.88 Buy It Now or Best Offer
free,30-Day Returns
Seller Store miracle_vehicle
(546) 96.4%,
Location: Monroe Township, New Jersey, United States
Ships to: US,
Item: 175854345296
Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Superseded Part Number:20774419, 25798011, 25798012, 25995438
OE/OEM Part Number:K621231 K621232
Mounting Style:Bolt-On
Interchange Part Number:CMS501016,25798012,25995438,CMS501017,2077441
Material:Steel
Type:Control Arm & Ball Joint Assembly
Features:100% Accuracy of Fit, No Drilling Required
Manufacturer Part Number:OED000125
Kit or Single Part:Kit
Surface Finish:Polished, Rust Protected
UPC:659514702421
Fitment Type:Direct Replacement
Placement on Vehicle:Front, Left, Lower, Right
Unbranded:Unbranded
Manufacturer Warranty:3 Years
Items Included:Bushing
eBay Fit For: 2008 – 2017 Buick Enclave 2009 – 2017 Chevrolet Traverse 2007 – 2016 GMC Acadia 2017 GMC Acadia Limited 2007 – 2010 Saturn Outlook Feature: – 100% Brand new, high-quality strength steel control arms. – The bushings come pre-installed, not easy to take off. – The control arms are built using advanced processes and premium coatings, to maximize their durability and corrosion resistance. – Welding is done by robotic arms, uniform thickness, no blow holes, slag, cracks, tearing, or incomplete fusion. Front Lower Control Arm Ball Joint for Chevy Traverse GMC Acadia Buick Enclave Fit For: 2008 – 2017 Buick Enclave 2009 – 2017 Chevrolet Traverse 2007 – 2016 GMC Acadia 2017 GMC Acadia Limited 2007 – 2010 Saturn Outlook Feature: – 100% Brand new, high-quality strength steel control arms. – The bushings come pre-installed, not easy to take off. – The control arms are built using advanced processes and premium coatings, to maximize their durability and corrosion resistance. – Welding is done by robotic arms, uniform thickness, no blow holes, slag, cracks, tearing, or incomplete fusion. – Measured by specialized inspection tools after welding to make sure assemble hole, bushings insert, and installation sizes are proper. – Undergo rigorous testing to ensure that long-lasting dependability and strength are built into every part, to ensure a smooth, stable, and safe ride. Package Includes: 1x Front Lower Right Control Arm W/ Ball Joint – K621231 1x Front Lower Left Control Arm W/ Ball Joint – K621232 Note: – Please Make Sure That Whether the Control Arm fits Your Vehicle or not Before Placing Order. – Professional Installation is Highly Recommended, Make Sure to Tighter the Screws. – Any Questions, Please e-mail us Freely. Item Specifics Superseded Part Number 20774419, 25798011, 25798012, 25995438 OE/OEM Part Number K621231 K621232 Mounting Style Bolt-On Interchange Part Number CMS501016,25798012,25995438,CMS501017,2077441 Material Steel California Prop 65 Warning This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. Type Control Arm & Ball Joint Assembly Features 100% Accuracy of Fit Manufacturer Part Number OED000125 Kit or Single Part Kit Surface Finish Polished, Rust Protected UPC 659514702421 Fitment Type Direct Replacement Placement on Vehicle Front Brand Unbranded Manufacturer Warranty 3 Years Items Included Bushing Payment 1.PayPal preferred. 2.All major credit cards are accepted through secure payment processor PayPal.(* If you use e-check on PayPal, delivery may take longer, as we will hold your order until your e-check clear) 3.Payment must be received within 7 business days of auction closing. 4.Please make sure your PayPal and eBay address is correct. If not, please correct it before payment. Thank you. 5.Custom duties, taxes, or charges are not included in the cost you pay to us. 6.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/ buying. Shipping US STOCK – Our goods are distributed in multiple warehouses in the United States 1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number. 2. Please check your shipping address carefully before checkout, it can’t be changed if order completed. 3. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days. 4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible. Returns 1.If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact me before you return it. 2.Defective items Must Be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. 3.Return shipping is to be paid by the Buyer. 4.We act as a responsible seller; we are willing to actively undertake the following responsibilities: a. The item is lost during transit; b. The item is damaged during transport; c. Due to our work errors, transporting the wrong items to the buyer; d. The item in the actual use of the process of quality problems. Installation Click “Contact seller” – Zoncar Service Team will reply you within 24 hours. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 6.Press stabilizer link at suspension strut out of bracket. 7.Insert new stabilizer link at suspension strut. 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. 3.Dismount the front underride guard. 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Warranty Policy Zoncar Warranty Specifications, Policies, and Procedures 10 Year Warranty The stated warranty term applies only to the above parts purchased from Zoncar. Zoncar holds no responsibility for labor costs or installation fees. Shipping fees are not included in the execution of warranty claims. Zoncar Axle warranties the above mentioned products to be free from defects in material and workmanship for a 90 days period from the date the customer receives the item. Zoncar will replace any of the above parts should that part be deemed defective by Zoncar. This expressed warranty covers only the aforementioned items, their internal parts, seals, O-rings, and gaskets. ABUSE, IMPROPER INSTALLATION, PARTS ADDED PERIPHERALLY, and ROAD CONDITIONS are specifically NOT covered by the warranty agreement. BENT SHAFTS, TIE RODS, and HOUSINGS are specifically NOT covered by warranty. This warranty covers ONLY the part purchased from Zoncar. Zoncar assumes or accepts NO responsibility for any expenses incurred for the removal or re-installation of the purchased part. There is no expressed or implied warranty for any labor performed. Labor costs are solely the responsibility of the purchaser of the above mentioned parts. The original purchaser of the part will be the only party to which this warranty applies. There is no stipulation of warranty to anyone but the original purchaser. Anyone attempting to execute this warranty that is not the original purchaser of the product will cause the warranty to immediately VOID. Should any of the above mentioned products prove defective in material or workmanship within the specified warranty period, the purchaser must return the defective part to Zoncar with a prepaid shipping label which will be used to provide the purchaser the replacement part. Zoncar assumes or accepts no warranty responsibility for the cost of shipping either the defective part or the replacement part. This stated warranty is limited to one replacement part per lifetime and is non-transferable under any circumstances. Zoncar, at our option, will replace or repair the warranty part free of charge, and then return the replacement part using the prepaid shipping label provided by the purchaser. For any Zoncar warranty claims requesting cross shipping (Zoncar ships replacement part while awaiting alleged defective part to be received), the purchaser is obligated to providing a prepaid shipping label to the shipping location and provide a 100% deposit based upon the retail cost of the item. THE LIMITED WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTIES OR ANY KIND, WHETHER STATUTORY, ORAL, WRITTEN, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE CONSUMERS EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY AND DETROIT AXLE ONLY OBLIGATION ARISING OUT OF OR IN CONNECTION WITH BREACH OF WARRANTY SHALL BE THOSE STATED HEREIN. WE EXPRESSLY DISCLAIM LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE AUTO PART SOLD. This warranty gives you specific rights, and you may also have other rights which vary from state to state. In addition, some states do not allow limitations on how long an implied warranty lasts, and some do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, limitations as to these matters contained herein may not apply to you. Zoncar warrants to the original purchaser that each remanufactured or new auto part sold by Zoncar shall be free, under normal use, from any defects in material and/or workmanship, subject to the following terms and conditions: DEFINITIONS: AUTO PART: As used herein, the term auto part shall mean: a remanufactured or new auto part supplied by Zoncar. TERMS: In the case of a drive axle or rack & pinion auto part, the boot/tie rods are not warranted due to road hazard. STANDARDS: Subject to limitations contained herein, Zoncar at its option, shall repair or replace the auto part within the warranty term subject to Zoncar approval, without charge to the owner/user. LIMITATIONS: This warranty applies only to the auto part supplied by Zoncar. This warranty shall not apply to, or include any of the following: 1. Repair or replacement required as a result of any accident, misuse, road hazard, tampering or disassembly. 2. Any Zoncar auto part used for competition or related purposes. 3. Any Zoncar auto part used on an off-road or fleet vehicle. 4. Any Zoncar auto part which has been repaired or remodeled by any person other than an authorized installer, or to which any device or accessory not conforming to O.E.M. specifications have been installed. 5. Any Zoncar auto part on which the periodic maintenance services required by the original manufacturer have not been performed. 6. Any Zoncar auto part failing as a result of failure to replace a different faulty component or failure to flush the power steering system thoroughly before installation. 7. Warranty shall not apply to ANY repairs and/or replacements not authorized by Zoncar. LIMITED LIABILITY: Zoncar under this warranty is limited liability solely to the repair or replacement of the defective parts. Zoncar shall not be liable for any incidental, special, consequential, or exemplary damages, or for any service not expressly provided for herein, relating to or arising from Zoncar products. Examples of excluded charges are labor time for alignment, fluids, and rental car reimbursement. LIMITED WARRANTY: This warranty is given in lieu of all other warranties, expressed or implied, including any warranty of merchantability, of fitness for a particular purpose, on the part of Zoncar, or the dealer installing the Zoncar product. No dealer, nor any agent or employee thereof, is authorized to extend or enlarge this warranty. US Stock Zoncar Service Team 10 Year Wattanty Return Policy Quick Response Front Lower Control Arm Ball Joint for Chevy Traverse GMC Acadia Buick Enclave Fit For: 2008 – 2017 Buick Enclave 2009 – 2017 Chevrolet Traverse 2007 – 2016 GMC Acadia 2017 GMC Acadia Limited 2007 – 2010 Saturn Outlook Feature: – 100% Brand new, high-quality strength steel control arms. – The bushings come pre-installed, not easy to take off. – The control arms are built using advanced processes and premium coatings, to maximize their durability and corrosion resistance. – Welding is done by robotic arms, uniform thickness, no blow holes, slag, cracks, tearing, or incomplete fusion. – Measured by specialized inspection tools after welding to make sure assemble hole, bushings insert, and installation sizes are proper. – Undergo rigorous testing to ensure that long-lasting dependability and strength are built into every part, to ensure a smooth, stable, and safe ride. Package Includes: 1x Front Lower Right Control Arm W/ Ball Joint – K621231 1x Front Lower Left Control Arm W/ Ball Joint – K621232 Note: – Please Make Sure That Whether the Control Arm fits Your Vehicle or not Before Placing Order. – Professional Installation is Highly Recommended, Make Sure to Tighter the Screws. – Any Questions, Please e-mail us Freely. PaymentShippingReturnsInstallationWarranty Policy 1.PayPal preferred. 2.All major credit cards are accepted through secure payment processor PayPal.(* If you use e-check on PayPal, delivery may take longer, as we will hold your order until your e-check clear) 3.Payment must be received within 7 business days of auction closing. 4.Please make sure your PayPal and eBay address is correct. If not, please correct it before payment. Thank you. 5.Custom duties, taxes, or charges are not included in the cost you pay to us. 6.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/ buying. US STOCK – Our goods are distributed in multiple warehouses in the United States 1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number. 2. Please check your shipping address carefully before checkout, it can’t be changed if order completed. 3. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days. 4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible. 1.If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact me before you return it. 2.Defective items Must Be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. 3.Return shipping is to be paid by the Buyer. 4.We act as a responsible seller; we are willing to actively undertake the following responsibilities: a. The item is lost during transit; b. The item is damaged during transport; c. Due to our work errors, transporting the wrong items to the buyer; d. The item in the actual use of the process of quality problems. Click “Contact seller” – Zoncar Service Team will reply you within 24 hours. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 6.Press stabilizer link at suspension strut out of bracket. 7.Insert new stabilizer link at suspension strut. 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. 3.Dismount the front underride guard. 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Zoncar Warranty Specifications, Policies, and Procedures 10 Year Warranty The stated warranty term applies only to the above parts purchased from Zoncar. Zoncar holds no responsibility for labor costs or installation fees. Shipping fees are not included in the execution of warranty claims. Zoncar Axle warranties the above mentioned products to be free from defects in material and workmanship for a 90 days period from the date the customer receives the item. Zoncar will replace any of the above parts should that part be deemed defective by Zoncar. This expressed warranty covers only the aforementioned items, their internal parts, seals, O-rings, and gaskets. ABUSE, IMPROPER INSTALLATION, PARTS ADDED PERIPHERALLY, and ROAD CONDITIONS are specifically NOT covered by the warranty agreement. BENT SHAFTS, TIE RODS, and HOUSINGS are specifically NOT covered by warranty. This warranty covers ONLY the part purchased from Zoncar. Zoncar assumes or accepts NO responsibility for any expenses incurred for the removal or re-installation of the purchased part. There is no expressed or implied warranty for any labor performed. Labor costs are solely the responsibility of the purchaser of the above mentioned parts. The original purchaser of the part will be the only party to which this warranty applies. There is no stipulation of warranty to anyone but the original purchaser. Anyone attempting to execute this warranty that is not the original purchaser of the product will cause the warranty to immediately VOID. Should any of the above mentioned products prove defective in material or workmanship within the specified warranty period, the purchaser must return the defective part to Zoncar with a prepaid shipping label which will be used to provide the purchaser the replacement part. Zoncar assumes or accepts no warranty responsibility for the cost of shipping either the defective part or the replacement part. This stated warranty is limited to one replacement part per lifetime and is non-transferable under any circumstances. Zoncar, at our option, will replace or repair the warranty part free of charge, and then return the replacement part using the prepaid shipping label provided by the purchaser. For any Zoncar warranty claims requesting cross shipping (Zoncar ships replacement part while awaiting alleged defective part to be received), the purchaser is obligated to providing a prepaid shipping label to the shipping location and provide a 100% deposit based upon the retail cost of the item. THE LIMITED WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTIES OR ANY KIND, WHETHER STATUTORY, ORAL, WRITTEN, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE CONSUMERS EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY AND DETROIT AXLE ONLY OBLIGATION ARISING OUT OF OR IN CONNECTION WITH BREACH OF WARRANTY SHALL BE THOSE STATED HEREIN. WE EXPRESSLY DISCLAIM LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE AUTO PART SOLD. This warranty gives you specific rights, and you may also have other rights which vary from state to state. In addition, some states do not allow limitations on how long an implied warranty lasts, and some do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, limitations as to these matters contained herein may not apply to you. Zoncar warrants to the original purchaser that each remanufactured or new auto part sold by Zoncar shall be free, under normal use, from any defects in material and/or workmanship, subject to the following terms and conditions: DEFINITIONS: AUTO PART: As used herein, the term auto part shall mean: a remanufactured or new auto part supplied by Zoncar. TERMS: In the case of a drive axle or rack & pinion auto part, the boot/tie rods are not warranted due to road hazard. STANDARDS: Subject to limitations contained herein, Zoncar at its option, shall repair or replace the auto part within the warranty term subject to Zoncar approval, without charge to the owner/user. LIMITATIONS: This warranty applies only to the auto part supplied by Zoncar. This warranty shall not apply to, or include any of the following: 1. Repair or replacement required as a result of any accident, misuse, road hazard, tampering or disassembly. 2. Any Zoncar auto part used for competition or related purposes. 3. Any Zoncar auto part used on an off-road or fleet vehicle. 4. Any Zoncar auto part which has been repaired or remodeled by any person other than an authorized installer, or to which any device or accessory not conforming to O.E.M. specifications have been installed. 5. Any Zoncar auto part on which the periodic maintenance services required by the original manufacturer have not been performed. 6. Any Zoncar auto part failing as a result of failure to replace a different faulty component or failure to flush the power steering system thoroughly before installation. 7. Warranty shall not apply to ANY repairs and/or replacements not authorized by Zoncar. LIMITED LIABILITY: Zoncar under this warranty is limited liability solely to the repair or replacement of the defective parts. Zoncar shall not be liable for any incidental, special, consequential, or exemplary damages, or for any service not expressly provided for herein, relating to or arising from Zoncar products. Examples of excluded charges are labor time for alignment, fluids, and rental car reimbursement. LIMITED WARRANTY: This warranty is given in lieu of all other warranties, expressed or implied, including any warranty of merchantability, of fitness for a particular purpose, on the part of Zoncar, or the dealer installing the Zoncar product. No dealer, nor any agent or employee thereof, is authorized to extend or enlarge this warranty. Copyright of Zoncar. All rights reserved. On Aug 9, 2023 at 21:40:34 PDT, seller added the following information:
Frequently Asked Questions About Front Lower Control Arm Ball Joint for Chevy Traverse GMC Acadia Buick Enclave in My Website
www.deafgirlsrescue.org is the best online shopping platform where you can buy Front Lower Control Arm Ball Joint for Chevy Traverse GMC Acadia Buick Enclave from renowned brand(s). www.deafgirlsrescue.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling Front Lower Control Arm Ball Joint for Chevy Traverse GMC Acadia Buick Enclave on www.deafgirlsrescue.org?
www.deafgirlsrescue.org helps you to shop online and delivers Patek Philippe to your doorstep. The best-selling Patek Philippe on www.deafgirlsrescue.org are: PATEK PHILIPPE genuine Archives Certificate Guarantee Of Origin Calatrava 3420 Patek Philippe Cal 10 110 part 401 stem NOS Vintage Magazine Lot: Patek Philippe & Colors Collection, Rare Finds #3300 patek philippe 4831 Complete authentic set Patek Philippe Complications 5054J With Archives 18K Yellow Automatic Watch 36mm Patek Philippe Complications World Time Auto White Gold Mens Watch 5231G-001 PATEK PHILIPPE Grand Complication 3970EJ-053 watch men TO157659 NEW Patek Philippe International Vol 5 #3 Ref. 5940 Nicholas Foulkes Auctions PATEK PHILIPPE Gondolo 4224/3 Ladies #GZ118 Rare Patek Philippe Naviquartz Desk Clock in Working Condition Authentic Patek Philippe Calatrava Travel Time 5134j Booklet Manual Cover SET Ermenegildo Zegna Patek Philippe Collaboration Mens Luxury Silk Tie 2002 Patek Philippe Aquanaut NOS Green Strap C92 Men Size PATEK PHILIPPE Leather Travel Watch Case Pouch Dark Brown New and unused ORIG Patek Philippe Calibres 12-600, 10-200 CENTER WHEEL WATCH PART CENTRE Watch Sapphire Crystal Glass for Patek Philippe Nautilus 4700/4970 18.5*18.5mm Patek Phillipe 21x18MM Uncut Green Rubber Strap: 5167a, 5167r, 5164a, 5164r 18k White Gold Patek Philippe With Diamond Bezel Watch Reference 3491 Patek Philippe International Vol 4 #2 Bernard Buffet Ref. 2526 Letter T. Stern Vintage 34mm LeCoultre Power Reserve Men’s Bumper Automatic Wristwatch 481 Patek Philippe M39743: 18k Rose Gold Nautilus, Watch Ref. 5712R, Box and Papers Patek Philippe Gondolo Tonneau Automatic 5030J 18K Gold Mens Watch 34x41mm B&P Original Patek Philippe Nautilus 5711g 18k Gold 40mm Case, Crystal and End Links Patek Philippe Nautilus Steel Automatic 40mm Bracelet Watch 5711/1A-001 Patek Philippe Annual Calendar Regulator 5235G White Gold Silver Dial – FULL SET Patek Philippe 5738R-001 Golden Ellipse Black Dial Watch Authentic Patek Philippe 20mm x 16mm Shiny Black Alligator Watch Strap B B38 OEM Patek Philippe Gondolo 5024G watch men TO149907 discount PATEK PHILIPPE Calatrava Ref.3426 Cal.23-300 Men’s I#131416 Vintage PATEK Philippe 18kt Buckle And Band 16mm. PATEK PHILIPPE 315SC Part 771 Mainspring To Fit NOS Patek Philippe World Time 18KRG 5230R-012 watch men TO170273 Patek Philippe Silk Men’s Tie BNIB Fast Ship! VIP GIFT Navy Blue Authentic 2023 Patek Philippe Cal 23-300 Watch Movement Spares Vintage Patek Philippe Box 3970 3940 Cherry Wood Leather Patek Philippe watch box case travel carry case dark brown leather Patek Philippe Patekphilppe genuine leather belt dark brown watch #KN929 PATEK PHILIPPE Tiffany ED KOEHN pocket watch movement 39mm Patek Philippe calibre 320 Barrel Complete with mainspring. genuine new Swiss Ma PATEK PHILIPPE 28-255 PART 1485/1 REVERSER MOUNTED NEW ORIGINAL PP Patek Philippe Neptune Moonphase Power Reserve Steel Mens Watch 5085 Papers Look 18 MM Pin Buckle Clasp Watch Leather Rubber Strap Fits for Patek Philippe Gold PATEK PHILIPPE Luxury Watch SOFTCOVER CATALOG 2020 2021 – 108 Pages Patek Philippe: Complicated Wrist Watches (German, English and French Edition) patek philippe Calatrava 3923A watch men TO01197 …PATEK PHILIPPE INTERNATIONAL MAGAZINE Number 11 (2002) Patek Philippe Watch Book RARE Patek Philippe Calatrava 5196R-001 watch men TO153403 Patek Philippe Collection 2002/2003 E Geneva Watch Catalog/Book Patek Philippe Calatrava 4897G-010 White Gold Diamond Hand Wound Ladies Watch Skeleton Patek Philippe Geneve Watch Mens Gold Swiss Vintage 1890s Engraved Patek Philippe Caran D’Ache Watch Ballpoint Pen With Box Brand New 2020 Tiffany & Co. Stamped Patek Philippe Box Papers White Gold 5712G-001 Patek Philippe Calatrava 3923J Men’s #W1147 Patek Philippe Calatrava Wristwatch 5120/1G-001 Gold Patek Philippe Geneve Book by Martin Huber & Alan Banbery 1982 First Edition PATEK PHILIPPE 2018 Collection Catalog w/Retail Price List Pamphlet Patek Philippe K18YG Cufflinks Luxury Men’s Ref.9002 With Guarantee card Antique Patek Philippe Dress Open Face Pocket Watch Wright Kay Detroit SN 84910 1950s Vintage Patek Philippe Oversized Gold Calatrava Mens Watch Ref 570 / 570j Patek Philippe International Magazine Lot Of 10 Volume 2 Patek Philippe 175th Anniversary Commemorative Watches Catalog *FACTORY SEALED* Patek Philippe Calatrava 33 18K Yellow Gold Champagne Gold Bracelet Watch | BOX Patek Philippe Journal Notebook Paper Notepad AD VIP Gift 14 MM Spring Bar Pin Buckle Watch Leather Rubber Strap Fits For Patek Philippe Patek Philippe 3634 Jumbo Golden Ellipse ONYX Dial 1973 Watch Serviced Box Paper Patek Philippe Lady Wrist Watch Movement 854887, Not working For Parts, See Note Patek Philippe 5167A Black Rubber Strap C09 21x18mm OEM 5167 Authentic Patek Philippe Geneve Black Leather Watch Strap 17. 9 x 16mm, 11.5+7.5 Patek Philippe Gondolo Pocket Watch Face 22 Lines 2009 Mint Patek Philippe 7119G-001 31mm 18K White Gold Gray Dial Unisex Watch Patek Philippe Calatrava 5117J-001 automatic date mens wristwatch 18K solid gold Patek Philippe Calatrava 36mm 18K Rose Gold Hand-Wind Mens Watch 5119R-001 Patek Philippe Aquanaut 5167r-001 40mm Rose Gold Brown Dial Full Set PATEK PHILIPPE CALATRAVA TRAVEL TIME 18CT GOLD REF. 5134J-001 Patek Philippe Complication 18K Yellow Gold Watch 5054J Authentic Patek Philippe 21mm x 16mm Blue Alligator Watch Strap Band D C95 OEM Patek Philippe 3800 1 White “SWISS” Dial Genuine “CERAMIC” Extreme Rare Patek Philippe Authentic 18k White Gold Crown-4.54MM item# 92043 Patek Philippe Ellipse 3988J 18k Yellow Gold Swiss Quartz White Dial Men 27mm Patek Philippe Handcraft Keyring Keychain Leather Azure Blue, Ref. P1345 Rare PATEK PHILIPPE Travel Watch Box Carry Box Case Dark Brown Leather BRAND NEW Patek Philippe Porcelain Plate 2012 Collection 1909 Pocket Watch Design NM Patek Philippe Annual Calendar Complications 5396G-011 White Gold Watch Red Square Patek Philippe Suede Nautilus Aquanaut Travel Case Patek Philippe La Flamme Ladies Watch 18k Authentic PATEK PHILIPPE Hand Bag / Tote Bag VIP Gift Vintage Tiffany & Co Wrist Watch Movement Made By PP Circa 1885 Patek Philippe Calatrava Cufflinks Brand new, never used Patek Philippe Lady Ellipse 18K Yellow Gold Ref. 4226 Patek Philippe Calatrava Rose Gold White Dial Automatic Men’s Watch 3802R Patek Philippe 2016 Collection Book Volume 3 – Hardcover – With Poster Time Warrior Men’s Japan Quartz Watch Luminous, Luxury Stainless Steel AP Style Patek Philippe Calatrava White Men’s Watch 6119R-001 TK Antique 1900s Patek Philippe 18k Yellow Gold SZ6 Ladies POCKETWATCH SZ 6 *ORIGINAL PATEK PHILIPPE MATT BLACK LEATHER BAND NEW 22mm Black/White Genuine Leather Classic Watch Band Strap Rose Gold Tone Buckle Patek Philippe Travel Time 34mm White Gold White Dial Hand Wind Men Watch 5034G PATEK PHILIPPE Cal. 310sc 2576 Date Jumper NOS Patek Phillipe Service Long Box #1, mint Mens Pullover Fleece Hoodie