PWM Dimming Speed Controller PWM Pulse Generator Driver Cycle Delay Module USA

$5.33 Buy It Now or Best Offer
free,30-Day Returns

Seller Store moduleme
(88451) 99.6%,

Location: JAMAICA, NY
Ships to: US,
Item: 156369784323

Restocking Fee:No
Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Unbranded:Unbranded
MPN:Does Not Apply
UPC:Does not apply
EAN:Does not apply
PP2 / PP2K / PP1 / PP1K:PP2 / PP2K / PP1 / PP1K
Type:PWM Pulse Generator
Working voltage:3.3~30V
Marke:Markenlos

ModuleMe Electronic PWM Dimming Speed Controller PWM Pulse Generator Driver Cycle Delay Module USA High-power PWM dimming speed control module solenoid valve number frequency duty cycle adjustable cycle delay Note that the high-power PWM driver (PP2 and PP2K type) is a MOS switch type output. When the load is not connected, there is no waveform, and the waveform is only after the load is connected. A variety of practical scenes! ! ! 1. LED brightness adjustment, frequency, duty cycle can be adjusted2. Motor speed adjustment, frequency and duty cycle can be adjusted3. Drive the solenoid valve to pull and release, automatic cycle, delay output, cycle number (or infinite loop) can be set.4. Control equipment to turn on and off, do switch fatigue test, voltage sag and other tests to verify the reliability of customer equipment.5. Delay start load, delay time can be set, after the delay, it will be turned on or intermittently. Highlights: 1. can directly drive LED, motor, solenoid valve and other loads2. Two modes can be selected:PWM mode – frequency (continuous), duty cycle. Note that the number of pulses cannot be set in this mode, and the pulse is always emitted.PULSE pulse mode – positive pulse width time, negative pulse width time, power-on delay start time, and number of pulses are adjustable.3. With start and stop button, can control the output and stop of the signal4. Wide voltage input 3.3-30V, 5.08mm terminal wiring Technical parameters:1. Working voltage: 3.3~30V (note that the positive and negative poles should not be reversed, otherwise it may burn out)2. Frequency range: 1Hz~150KHz, the accuracy is about 2%. Motor speed control generally chooses 20KHZ3. duty cycle range: 0-100%, 1% stepping4. number of pulses: 1-9999, or infinite (display ‘—-’ stands for infinity)5. delay output time: 0.000s-9999s, the minimum can be set 1ms6. positive and negative pulse width length: 0.000s-9999s, the minimum can be set 1ms7. output load capacity: less than 8A (MOS switch tube)8. Output amplitude: The amplitude is equal to the supply voltage (OUT+ is directly connected to the V+ module)9. Product size: 79mm*43mm*30mm10. Product Weight: 42g11. Packing: Anti-static bag Module description: Button operation instructions PWM mode (display has “%” for PWM mode) The factory default mode is PWM mode, FREQ+ and FREQ-key set frequency, DUTY+ and DUTY-button set duty cycle; short press STOP button control signal output or stop, stop output is 0, the screen displays “OUT” mark as There is output, otherwise it stops output; the default factory frequency is 1KHZ and the duty cycle is 50%. If you want to switch to PULSE mode, long press the SET button (more than 6 seconds), do not release, you will see the screen change, “%” disappears, it is PULSE mode. PULSE mode (No “%” on the right side of the display is PULSE mode) The line above the LCD screen displays the positive pulse width time. The P+ and P- buttons set the parameter. The line below the LCD screen displays the negative pulse width time. The N+ and N- buttons set the parameter. Press the STOP button to control the signal output or stop. When the output is stopped, the output is 0. The screen displays “OUT” for output, otherwise it stops output; the default factory positive pulse width is 0.5 seconds and the negative pulse width is 0.5 seconds. Pulse number and delay time setting – In PULSE mode, press and hold the SET button for 2 seconds and then release, enter the pulse number and delay time setting interface, the screen displays SET, it will be turned off and cleared after entering. ;P+ and P- buttons set the delay time, N+ and N- buttons set the number of pulses, the factory default delay time is 0 seconds, the number of pulses is infinite (display —-); then press SET button 2 In seconds, it will automatically return to the pulse interface, press the STOP button, after the delay setting time, start to issue the set number of pulses. If the number of pulses is sent, it will automatically output 0. If the period is not sent, pressing the STOP button will turn off. The output pulse is turned off and cleared, and the set number of pulses is issued each time it is started. Application Operation Examples PWM output 20KHZ, 60% duty cycle: Select PWM mode, the frequency is set to 20.00, and the duty ratio is set to 060%. The output is turned on for 0.6 seconds and turned off for 0.2 seconds. Infinite loop: select PULSE mode, the positive pulse width is set to 0.600, the negative pulse width is set to 0.200, the delay time is set to 0.000, and the number of pulses is set to — -. Power on or press the start button, delay 5 seconds, then the output is turned on for 0.6 seconds, off 0.2 seconds, infinite loop: select PULSE mode, positive pulse width is set to 0.600, negative pulse width is set to 0.200, delay The time is set to 5.000 and the number of pulses is set to —-. Power on or press the start button, delay 5 seconds, then output high level 10ms low level 10ms pulse 100: select PULSE mode, positive pulse width is set to 0.010, negative pulse width is set to 0.010, delay The time is set to 5.000 and the number of pulses is set to 0100. Power-on delay for 10 seconds, then permanently output signal: select PULSE mode, the positive pulse width is set to a number greater than 0, the negative pulse width is set to 0, the delay time is set to 10.00 seconds, and the pulse number is infinite. (—-). Other applications can explore or consult customer service All setup parameters are not lost when they are turned off. PWM 脉冲个数频率占空比可调方波矩形波信号发生器带壳 ZK-PP1 PWM 脉冲个数频率占空比可调发生器模块方波矩形波3.3-30V ZK-PP2K 大功率PWM调光电机调速电磁阀脉冲数频率占空比可调循环延时带壳 ZK-PP2 大功率PWM电磁阀个数频率占空比可调循环延时调光调速模块 PaymentShippingRefundPayment 1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase. 2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 30 days of delivery date and item must be in original new condition. 3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.Shipping Please fill in the correct address and zip code and I will ship quickly!Refund If the item is defect when you receive it or you are not satisfied with it, please return it within 30 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.On Aug 23, 2024 at 02:19:59 PDT, seller added the following information:

Frequently Asked Questions About PWM Dimming Speed Controller PWM Pulse Generator Driver Cycle Delay Module USA in My Website

www.deafgirlsrescue.org is the best online shopping platform where you can buy PWM Dimming Speed Controller PWM Pulse Generator Driver Cycle Delay Module USA from renowned brand(s). www.deafgirlsrescue.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling PWM Dimming Speed Controller PWM Pulse Generator Driver Cycle Delay Module USA on www.deafgirlsrescue.org?

PWM Dimming Speed Controller PWM Pulse Generator Driver Cycle Delay Module USA

Frequently Asked Questions About PWM Dimming Speed Controller PWM Pulse Generator Driver Cycle Delay Module USA in My Website

What are the best-selling PWM Dimming Speed Controller PWM Pulse Generator Driver Cycle Delay Module USA on www.deafgirlsrescue.org?

Leave a Reply Cancel reply