Set 4 Front LH or RH Hub Bearing+CV Axle Shaft For Pontiac Grand Prix 2003-2008

$216.1 Buy It Now or Best Offer
free,30-Day Returns

Seller Store scitoo-autoparts
(269855) 99.3%,

Location: Ontario, California
Ships to: US,
Item: 235472976572

Restocking Fee:No
Return shipping will be paid by:Seller
Returns Accepted:Returns Accepted
Item must be returned within:60 Days
Placement on Vehicle:Right,Left,Front
Manufacturer Warranty:1 Year
Finish:Polished, Rust Protected
Interchange Part Number:513203,PBR930184;WB13160;WB13203;66-1250,66-1255
cn-batteries:cn-batteries
UPC:Does not apply
Other Part Number:BR930184;HA590085;PBR930184
Fitment:Fits Chevrolet Impala 2000-2005 2006 2007 2008
Fits:Fits Pontiac Grand Prix 2003-2005 2006 2007 2008
Cross part number:For Buick Century Chevrolet Venture Pontiac Montana 03-05
Manufacturer Part Number:SCI832602TOO
Flange Diameter:5.7 In.
Bolt Hole qty:3
Material:Steel
Wheel Stud Quantity:5
ABS Sensor:No
CV Axle Spindle Nut Hex Head Size:34mm
CV Axle Spindle Nut Thread Size:M27 X 2
Axle Nut Locking Type:Self Lock
CV Axle Compressed Length-Left:21 13/16″
Input Shaft Connection Style:Spline
Input Shaft Spline Count:34
Output Shaft Connection Style:Spline
Output Shaft Spline Count:33
Type:Wheel Hub & Bearing Assembly
Part Type:CV Axle Assembly, CV Axle Shaft
Items Included:2X Front CV Axle,2X Front Wheel Bearing Hub
Wheel Stud Size:M12x1.5
CV Axle Compressed Length-Right:24 7/8″

Specifications : – Fits LH (Driver Side) and RH(Passenger Side)FRONT- Not Has ABS sensor w/stainless steel sensor & plastic wire clips- Direct fit, designed for vehicle specific application on all makes and models- Latest generation design used in manufacturing our hub assemblies- High quality seal design ensures a clean, long lasting hub bearing- Sensors designed to match specific make and model- Precision machined and pre-coated with anti-corrosion lubricant- Manufactured for quick and easy installation For the following years and models: Fits Chevrolet Venture 2003-2005 FWDFits Buick Regal 2003-2004Fits Chevrolet Monte Carlo 2003-2007Fits Pontiac Montana 2003-2005 FWDFits Buick Lacrosse 2005Fits Chevrolet Impala 2000-2008Fits Pontiac Grand Prix 2003-2008Fits Buick Century 2003-2005Fits Buick Allure 2005 Package include: 2 Pcs Front Driver or Passenger Wheel Hub Bearings-513203 1 Pcs Front Driver CV Axle Shaft-66-1255 1 Pcs Front Passenger CV Axle Shaft-66-1250 1 Year Warranty How to Install a Wheel Bearing Hub Assembly : 1. Park the vehicle on a flat, level paved or concrete surface. Place the vehicle in gear or park and apply the parking brake. 2. Place a wheel chock behind a rear tire (or front if youre doing a rear hub-bearing assembly). 3. Loosen the lug nuts on the wheel of the hub bearing youre replacing with the breaking bar and a socket; do not remove them. 4. Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand, preferably on the frame rail if present. 5. Remove the lug nuts and wheel. 6. Locate the caliper bolts and remove them with the ratchet and a socket. 7. Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord. Do not allow the caliper to dangle on the rubber brake hose. 8. Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket. You may want to break them loose with the breaking bar first if theyre really tight. On some vehicles, the brake pads will remain in the bridge and can be removed by prying out with the screwdriver. On other models, the pads stay intact and may be clipped to the caliper. If you have to remove the pads, do so by taking note how they were placed in the bridge and be sure youre able to put them back in the same manner they were extracted. 9. Remove the rotor. If it is stuck to the hub, you may have to hit it with a large rubber mallet. Use a rubber mallet if youre not going to replace the rotor, so you dont damage the surface. 10. Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug. In many applications, if the ABS wire is integrated with the wheel-bearing hub assembly, a new one will come with it. If youre not sure, check the box of the new bearing and if theres an ABS wire, follow the wire until you locate the plug, unplug it and unclip it from its mounts. If ABS is present but not integrated with the bearing assembly, remove the sensor from the bearing with a ratchet and socket. 11. Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut. 12. Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket. The location of these can sometimes create a tight area to place a socket and tool on to remove them with. You may have to apply some ingenuity. Replace the socket on the ratchet to extract the bolts quickly and easier. Most hubs have three or four bolts. 13. Install the slide hammer onto the lug studs and secure with tightened lug nuts. This may take several attempts and a couple of breaks in between to remove the hub bearing from the knuckle. Pay close attention to your progress and try to determine when the bearing will separate. Take note of how the backing plate is installed between the knuckle and the bearing so you can replace it in the same manner. 14. Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper. Move the drive-shaft spindle around to get it out of your way. Take your time when doing this and make sure its as clean as possible. 15. Place the backing plate in its original position and place the new bearing onto the knuckle. Manipulate the drive-shaft spindle splines into the center of the hub bearing. Push the bearing on as far as you can, making sure to line it up correctly if ABS lines or plugs are present. 16. Replace the wheel-bearing assembly bolts. Theyre pretty long, so as soon as you can thread them into the new bearing, start to tighten them. Pull the bearing in by tightening the bolts a little bit at a time and then switching to the next bolt to make sure the bearing assembly does not shift in the knuckle and cause damage. Once the bearing is drawn in flush, use the breaking bar to get the bolts as tight as you can get them. 17. Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket. 18. Replace the brakes in the same manner you extracted them. You may need to push the caliper piston in a bit with a C-clamp to get it over the rotor. Plug in the ABS lines or reattach them to the bearing, if applicable. 19. Replace the tire and lug nuts, and tighten the lug nuts as tight as you can get them. 20. Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting. 21. Pump the brake pedal if you had to push the caliper piston in with a C-clamp to restore hydraulic pressure to that caliper piston. 22. Remove the wheel chock, release the parking brake, and go for a test drive. Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov. 1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order. 2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days. 3.Local pick up is not available. 4.International Buyers C Please Note: a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. ] Payment 1.We accept multiple payment methods, such as PayPal, VISA, Master Card, etc.. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 7 days as auction ended or order might be delayed. Returns 1.All of our brand new items come with a 60-Days money-back guarantee. 2.We define the item as defective only if it doesnt function as described, It is the buyers responsibility to understand the item description before bidding. 3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement. 4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 5.Shipping& handling cost are not refundable. 6.Man-made damage by abuse or wrong operation is not covered by this warranty. 7.No product liability insurance is assumed. 8.Refunds will be credited within 5 to 7 business days of receiving the return. When weve received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. ] Customer Services Q: How do I pay for my purchase? A: MY store accepts PayPal, VISA, Master Card, etc.. Q: When will the item be shipped out? A: This item will be shipped with 2 business day once payment completed. Q: Where is my tracking number? A: Please log on your account, click “my eBay”–>”my summary”, or open your email box and find the shipping notification email. Q: How do I return an item? A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ] Feedback 1. We will leave a feedback once we get your payment. 2. If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers. 3. If you are satisfied with the product you received, wish you can leave us a feedback. Copyright of SCITOO-AutoParts . All rights reserved.

Frequently Asked Questions About Set 4 Front LH or RH Hub Bearing+CV Axle Shaft For Pontiac Grand Prix 2003-2008 in My Website

www.deafgirlsrescue.org is the best online shopping platform where you can buy Set 4 Front LH or RH Hub Bearing+CV Axle Shaft For Pontiac Grand Prix 2003-2008 from renowned brand(s). www.deafgirlsrescue.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Set 4 Front LH or RH Hub Bearing+CV Axle Shaft For Pontiac Grand Prix 2003-2008 on www.deafgirlsrescue.org?

Set 4 Front LH or RH Hub Bearing+CV Axle Shaft For Pontiac Grand Prix 2003-2008

Frequently Asked Questions About Set 4 Front LH or RH Hub Bearing+CV Axle Shaft For Pontiac Grand Prix 2003-2008 in My Website

What are the best-selling Set 4 Front LH or RH Hub Bearing+CV Axle Shaft For Pontiac Grand Prix 2003-2008 on www.deafgirlsrescue.org?

Leave a Reply Cancel reply